Posted: Fri Dec 09, 2005 12:51 am Post subject: HDD DEAD - DO I HAVE TO CHIP? ONE FOR PIRRUP
Ok, I totally screwed up a softmod, had it working fine but DIVX movies would just show blank screen so I messed about with it and the HDD is now dead.
I have another XBOX which is chipped [soldered] Executer 2.6 so all I have done so far is setup a new 20GB HDD using this chipped xbox.
Here's the challenge!! I have no way as far as I can tell of obtaining the hash number that is in the eeprom of the diskless xbox to transfer to the new HDD to enable the lock/unlock requirement I have no backups
I hope you are out there Pirrup as you might as well have designed the damned thing from all the info I have read in your posts but alas I can't help but feel that even you will not have a solution for this other than chipping it but as a newbie I live in hope as well as naivety
Many thanks in advance Oliman74
bobrownik V.I.P. Lifetime Xbox Version: 1.0-1.6 Modded: xenium/aladdin/x2.3/DuoX2
Joined: Oct 21, 2004 Posts: 914 Location: PA, USA
Posted: Fri Dec 09, 2005 1:15 am Post subject: yeahhh
so you have a dead harddrive and no eeprom backup ,
yeah you need to chip it , _________________ Xbox v1.0/1.1/1.5/1.6a
TSOP Flash,aladdin,xenium,duox2,x2.3b
Bios Xecuter2 4983.06
HDD 80Gb-250GB
DVD Drive Samsung 616t (modded),+all stock drives
Dash UnleashX ,
ATA 133 cable
pirrup V.I.P. Lifetime Xbox Version: 1.0-1.6 Modded: xenium/aladdin/x2.3/DuoX2
Joined: Feb 01, 2005 Posts: 1345 Location: belgium
Posted: Fri Dec 09, 2005 7:29 am Post subject:
desolder your chip and put it in the dead xbox (with a new hd)
prepare the hd with AID , install softmod and LOCK the hd .
remove the chip and voila _________________ HOTSWAP | MS dash |
Flashing Hitachi(xbox360)
oliman74 Xbox-HQ Newbie Xbox Version: 1.0-1.6 Modded: xenium/aladdin/x2.3/DuoX2
Joined: Dec 04, 2005 Posts: 2
Posted: Fri Dec 16, 2005 1:25 am Post subject:
Well, guess what?
I bought a 2.6 Xecuter and screwed the bios flash [got muddled up with Evox and Xecuter DOH and used a 1MB file] but took the chip from the pre modded box as they are only a push fit and flashed that one correctly [other box is 1.5 mine is 1.6] Managed to get AID2 up and as soon as that happened I switched the chip off and performed a softmod.
Might not sound much but I then had to swap the chips back and reflash the other chip back to v1.5 as the box belongs to a mate from work!! Thankfully everything is now fine.
Out of interest though and I thought perhaps this is something that you have not been asked b4: Can I flash the chip in my now softmodded box via ftp or something, what d'ya reckon Mr Pirrup?
Regards, OliMan74
|
All times are GMT |Page 1 of 1
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum
HQ Network: 30,556 | 
Guests: 25377 | 
Members: 0 
Forums 
I have no backups
