Posted: Wed Aug 30, 2006 10:18 pm Post subject: LPC Holes
Hi am a total newbie, with this i ordered a Xapt3r and X3 for my xbox version
1.0
But when i check every tutorial for the Xapt3r it seems that the LPC Holes
are not filled with metal.
My LPC holes are filled with metal not allowing me to insert the Xapt3r.
Am wondering if anyone can give me any tips or why its like this.
Thanks!
yoshie1 V.I.P. Lifetime Xbox Version: Xbox V1.6 Modded: Xenium ICE White
Joined: Dec 26, 2004 Posts: 958 Location: Akron, Ohio
Posted: Wed Aug 30, 2006 10:28 pm Post subject:
Thats how the v1.0s were.....kinda sucks but its not too much of a hassle to fix it....for me i took out my desoldering braid...laid it on the board over one of the holes and heated it up until it smoked a little which told me it sucked up all the metal.....i dont think you can poke it out but i may be wrong...just wait on here for some more feeback if you aren't too hip to my suggestion...later _________________ Xbox V1.6
Xenium ICE White
EvoX M8+ 16 137+
EvoX 3935
Maxtor 300GB
Tudy Xbox-HQ User Xbox Version: Xbox V1.6 Modded: Xenium ICE White
Joined: Aug 30, 2006 Posts: 13
Posted: Wed Aug 30, 2006 11:34 pm Post subject:
Thanks for the reply!
I'll wait around for anymore solutions as I could not see myself doing that with ease.
Thanks again!
robzzombie Moderator
Joined: Jul 15, 2006 Posts: 521 Location: Lockport, Illinois, USA
Posted: Thu Aug 31, 2006 2:15 am Post subject:
Desod The LPC Holes Thats Tho Only Way, If You Try To Poke Them Out You Risk Breaking Your MOBO
KingArthur Xbox-HQ Member Xbox Version: Xbox v1.6 Modded: Xenium ICE
Joined: Dec 26, 2004 Posts: 58 Location: Colorado
Posted: Thu Aug 31, 2006 3:30 am Post subject:
He's right, there is no other way. You have to desolder the holes with a desoldering braid, or a desoldering iron/plunger tool. DONT try to poke them out, you will more than likely destroy your motherboard. _________________ Xbox v1.6
Evox M8 16 Bios
UnleashX Dashboard
Xenium Ice
20gb HDD
Manik Xbox-HQ Freak Xbox Version: Xbox v1.6 Modded: Xenium ICE
Joined: Aug 21, 2006 Posts: 519 Location: Ontario, Canada
Posted: Thu Aug 31, 2006 3:35 am Post subject:
another thing is.. if u try to go ahead and poke it out, it will more then likeley slip and destroy a trace or more. Your xbox will get screwed up.. Desoldering is best techinique...
Tudy Xbox-HQ User Xbox Version: Xbox v1.6 Modded: Xenium ICE
Joined: Aug 30, 2006 Posts: 13
Posted: Thu Aug 31, 2006 12:06 pm Post subject:
Ok done it, but i think i kinda screwed up...
The Xapt3r has 3 blue leds showing and one red..i belive thats good right?
But the xbox turns on then off then on then off
and finaly it stays on flashing red and green..
TheRealHypnotiX Moderator
Joined: Feb 01, 2006 Posts: 2508 Location: Pensacola, FL
Tudy Xbox-HQ User Xbox Version: Xbox v1.6 Modded: Xenium ICE
Joined: Aug 30, 2006 Posts: 13
Posted: Thu Aug 31, 2006 12:34 pm Post subject:
If it was a bad bios how would i fix it?
Manik Xbox-HQ Freak Xbox Version: Xbox v1.6 Modded: Xenium ICE
Joined: Aug 21, 2006 Posts: 519 Location: Ontario, Canada
Posted: Thu Aug 31, 2006 2:14 pm Post subject:
flash the bios using the flash tool in AID
Tudy Xbox-HQ User Xbox Version: Xbox v1.6 Modded: Xenium ICE
Joined: Aug 30, 2006 Posts: 13
Posted: Thu Aug 31, 2006 2:27 pm Post subject:
I dont think i'll be able to do that, as i forgot to mention i have no video on my tv
Manik Xbox-HQ Freak Xbox Version: Xbox v1.6 Modded: Xenium ICE
Joined: Aug 21, 2006 Posts: 519 Location: Ontario, Canada
Posted: Thu Aug 31, 2006 2:29 pm Post subject:
how come? _________________
Tudy Xbox-HQ User Xbox Version: Xbox v1.6 Modded: Xenium ICE
Joined: Aug 30, 2006 Posts: 13
Posted: Thu Aug 31, 2006 2:31 pm Post subject:
I turn my tv on and switch to the AV1 channel where the xbox should show a boot logo and such.
But this time i will turn it on and there is no video just the xbox fragging and like a "puff" sound from the tv when the xbox boots up and thats it
Thanks for the quick replys!
Manik Xbox-HQ Freak Xbox Version: Xbox v1.6 Modded: Xenium ICE
Joined: Aug 21, 2006 Posts: 519 Location: Ontario, Canada
Posted: Thu Aug 31, 2006 2:35 pm Post subject:
give me a minute or 2, i have to fix something, i'll get back to u
TheRealHypnotiX Moderator
Joined: Feb 01, 2006 Posts: 2508 Location: Pensacola, FL
Posted: Thu Aug 31, 2006 2:37 pm Post subject:
well its an x3, i thimn it has emergency bios, tryin turning it on with both eject and powerbutton at the same time, if that doesnt work try changing it to a dif bank, and if that doesnt work, its bad connection, u said u think u screwed it up, y do u say that? just to get more info and help out a lil more _________________ Hotswap Tutorial|FTP Tutorial|HyperX Flashing Tutorial
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum
HQ Network: 32,902 | 
Guests: 25417 | 
Members: 0 
Forums 
