Posted: Mon Oct 31, 2005 3:25 pm Post subject: x3 ce modchip flashing problem
hi . i have big problem. i have xbox 1.6 and i want to flash new bios. i got EvolutionX M8 Bios_v1.6 from irc then convert the file to ISO then burn the file to cd-RW . i insert the cd in xbox then start to update the chip. xbox turn off and didn't turn up again. i power up the xbox and start turn on ,off, on, off, and on. the eject botton is flashing red and gree and there is no pic on tv. i don't how to fix the problem can someone help me please.
some people told me to use ( pressing power and eject to load the backup) is not working.
some people told me to (Try booting from bank 5678: off,on,off,off with protect off) i don't how to do it
is there guide to explane how to fix it please.
thanks for help...
jhondra V.I.P. Member Xbox Version: Xbox V1.0 Modded: Xecuter3 CE
Joined: Sep 12, 2005 Posts: 288 Location: Boise, ID
Posted: Mon Oct 31, 2005 3:30 pm Post subject:
Both of those recommendations should have worked (boot from backup BIOS by pushing power/eject at same time, or booting from bank 5,6,7, and you should have seen the flash BIOS show up (with no disk in the drive). Are you CERTAIN that your X3 CE is properly installed? If it is a brand new mod, you may have had a wire pop loose or something and that is the problem (not a problem with the bios, etc). I would recommend rechecking all the hard wire stuff...
Regards,
-Jhondra _________________ Xecutor 3 CE
X3 3294 Bios
14 total successful solder-mod xbox's (v1.0 to v1.6b; favorite is v1.4 Sept 2003; very clean motherboard and usually has Samsung DVD), including two 128MB upgrades and 2 X3 LCD/CP's.
newguy Xbox-HQ User Xbox Version: Xbox V1.0 Modded: Xecuter3 CE
Joined: Jul 02, 2005 Posts: 14
Posted: Mon Oct 31, 2005 3:56 pm Post subject:
jhondra wrote:
Both of those recommendations should have worked (boot from backup BIOS by pushing power/eject at same time, or booting from bank 5,6,7, and you should have seen the flash BIOS show up (with no disk in the drive). Are you CERTAIN that your X3 CE is properly installed? If it is a brand new mod, you may have had a wire pop loose or something and that is the problem (not a problem with the bios, etc). I would recommend rechecking all the hard wire stuff...
Regards,
-Jhondra
i don't know if i installed X3 CE properly
there are two pisces came with chip , do i have to install them. if yes . is there guide.
here are two pic of two pisces
xbox pic.jpg
Description:
Filesize:
20.24 KB
Viewed:
103 Time(s)
jhondra V.I.P. Member Xbox Version: Xbox V1.0 Modded: Xecuter3 CE
Joined: Sep 12, 2005 Posts: 288 Location: Boise, ID
Posted: Mon Oct 31, 2005 8:30 pm Post subject:
You don't HAVE to install them, but if you DO NOT, then you can't switch to booting from bank 5,6,7,8 and it won't interpret the power/eject at the same time button push to request a boot from the backup OS. Grin, I guess things are making a little more sense now.
Here is a good write up on installing the X3 CE (and at the end it details installing those additional pieces as well as the bank controls and stuff).
Install those parts and you should be good to go...Cheers! No life in prison for you!
-Jhondra _________________ Xecutor 3 CE
X3 3294 Bios
14 total successful solder-mod xbox's (v1.0 to v1.6b; favorite is v1.4 Sept 2003; very clean motherboard and usually has Samsung DVD), including two 128MB upgrades and 2 X3 LCD/CP's.
yoshie1 V.I.P. Lifetime Xbox Version: Xbox V1.6 Modded: Xenium ICE White
Joined: Dec 26, 2004 Posts: 958 Location: Akron, Ohio
Posted: Mon Oct 31, 2005 9:15 pm Post subject:
Well man I don't know if this will help you out but this is what has happened for me when I have had to install a new bios....I have never converted the file to an iso....i have always left it as a bin file....maybe that is what went wrong with trying to find it at least....also, you gotta make sure you have the right bios size for your chip...i haven't used the x3 but you gotta check to see if its 256k, 512k, or 1mb and the get the correct m8+16 bios that corresponds to it...also if you plan on putting in a larger hdd then make sure you get the bios with lba48 support (will either say lba48 at the end or 137+, something along those lines) if you installed aid 2.11 there is a bios section after you extract the stuff which was put together very well so you dont have to mess with downloading a possibly corrupt file...hope this helps some...later. _________________ Xbox V1.6
Xenium ICE White
EvoX M8+ 16 137+
EvoX 3935
Maxtor 300GB
newguy Xbox-HQ User Xbox Version: Xbox V1.6 Modded: Xenium ICE White
Joined: Jul 02, 2005 Posts: 14
Posted: Mon Oct 31, 2005 9:52 pm Post subject:
jhondra wrote:
You don't HAVE to install them, but if you DO NOT, then you can't switch to booting from bank 5,6,7,8 and it won't interpret the power/eject at the same time button push to request a boot from the backup OS. Grin, I guess things are making a little more sense now.
Here is a good write up on installing the X3 CE (and at the end it details installing those additional pieces as well as the bank controls and stuff).
Install those parts and you should be good to go...Cheers! No life in prison for you!
-Jhondra
the file is damaged
look what it say
(there was an error opening this decument.the file is damagedand could not be repaired)
jhondra V.I.P. Member Xbox Version: Xbox V1.0 Modded: Xecuter3 CE
Joined: Sep 12, 2005 Posts: 288 Location: Boise, ID
Posted: Mon Oct 31, 2005 10:03 pm Post subject:
Try it again. It seems to work fine for me. Shrug.
-Jhondra _________________ Xecutor 3 CE
X3 3294 Bios
14 total successful solder-mod xbox's (v1.0 to v1.6b; favorite is v1.4 Sept 2003; very clean motherboard and usually has Samsung DVD), including two 128MB upgrades and 2 X3 LCD/CP's.
newguy Xbox-HQ User Xbox Version: Xbox V1.0 Modded: Xecuter3 CE
Joined: Jul 02, 2005 Posts: 14
Posted: Mon Oct 31, 2005 10:20 pm Post subject:
what should i do to booting from bank 5,6,7,. what i press. please help.
jhondra V.I.P. Member Xbox Version: Xbox V1.0 Modded: Xecuter3 CE
Joined: Sep 12, 2005 Posts: 288 Location: Boise, ID
Posted: Tue Nov 01, 2005 12:24 am Post subject:
Follow that guide to install the switches and the power/eject switch inline connector (if you can ever get the link to work), and it shows you how to set the DIP switch settings to boot from that bank. Basically, you had it right in your first email: booting from bank 5678: off,on,off,off
That should put you back to booting into a "flash bios". Or, you just push and hold power and eject at same time to boot from backup and try to flash bank 1234...again, you MUST put those other pieces in though...grin.
-Jhondra _________________ Xecutor 3 CE
X3 3294 Bios
14 total successful solder-mod xbox's (v1.0 to v1.6b; favorite is v1.4 Sept 2003; very clean motherboard and usually has Samsung DVD), including two 128MB upgrades and 2 X3 LCD/CP's.
newguy Xbox-HQ User Xbox Version: Xbox V1.0 Modded: Xecuter3 CE
Joined: Jul 02, 2005 Posts: 14
Posted: Tue Nov 01, 2005 4:52 pm Post subject:
jhondra wrote:
Follow that guide to install the switches and the power/eject switch inline connector (if you can ever get the link to work), and it shows you how to set the DIP switch settings to boot from that bank. Basically, you had it right in your first email: booting from bank 5678: off,on,off,off
That should put you back to booting into a "flash bios". Or, you just push and hold power and eject at same time to boot from backup and try to flash bank 1234...again, you MUST put those other pieces in though...grin.
-Jhondra
i installed but the power button dosen't work and eject button work fine.
by pressing first power then eject button it dosn't load any bois.can i fix the problem by FTP.
switch inline connector.jpg
Description:
Filesize:
25.51 KB
Viewed:
52 Time(s)
jhondra V.I.P. Member Xbox Version: Xbox V1.0 Modded: Xecuter3 CE
Joined: Sep 12, 2005 Posts: 288 Location: Boise, ID
Posted: Wed Nov 02, 2005 3:35 pm Post subject:
Hum...something isn't plugged in right then, if the power button isn't working. You need to get that worked out, first. Then, you should be able to press POWER and EJECT at the same time and boot to a backup BIOS. You have to get the power button working with those additional components, though.
Don't see how you would be able to fix this with FTP...
Regards,
-Jhondra _________________ Xecutor 3 CE
X3 3294 Bios
14 total successful solder-mod xbox's (v1.0 to v1.6b; favorite is v1.4 Sept 2003; very clean motherboard and usually has Samsung DVD), including two 128MB upgrades and 2 X3 LCD/CP's.
newguy Xbox-HQ User Xbox Version: Xbox V1.0 Modded: Xecuter3 CE
Joined: Jul 02, 2005 Posts: 14
Posted: Wed Nov 02, 2005 4:07 pm Post subject:
i took every thing out and then i install it again . now xbox when turn on , will turn off and on by it self. eject button flashing red and green and the switch inline connector light is blue and no picture on tv. when i took the chip out and turn xbox on won't turn off and on by it self.
|
All times are GMT |Page 1 of 1
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum
HQ Network: 35,879 | 
Guests: 16985 | 
Members: 1 
Forums 
and you should have seen the flash BIOS show up (with no disk in the drive). Are you CERTAIN that your X3 CE is properly installed? If it is a brand new mod, you may have had a wire pop loose or something and that is the problem (not a problem with the bios, etc). I would recommend rechecking all the hard wire stuff...
