wardawg795 Xbox-HQ Enthusiast Xbox Version: v1.6 Modded: xenium ice
Joined: Dec 29, 2004 Posts: 32 Location: St. Petersburg, Florida
Posted: Thu Jan 06, 2005 5:47 pm Post subject: Emergancy dead xenium ice
This sucks I went to update my Xenium OS, I read all the instructions over and over again, I burnt the iso properly. I did everything that the instructions told me to do, but when I went to recovery mode to flash the update, the screen whent blank, the eject led started blinking green orange and white. What did I do to my Baby Girl
Im scared. Now when I turn the xbox on I get a blank screen and solid green leds from the chip and theeject led. My chip led should be blue but now its just green. HELP!!!!!!!!!!!!! please MODGOd HELP!!!!!!!!!
T-Rizzle Xbox-HQ Freak Xbox Version: v1.6 Modded: xenium ice
Joined: Dec 29, 2004 Posts: 617 Location: South Dakota, USA
Posted: Thu Jan 06, 2005 5:57 pm Post subject:
I don't know much about the Xenium OS but can't you just reflash it with an original bios and start over? There should be a failsafe bios or just a backup one somewhere that you can flash it with and start over I would assume. I'm sure ModGod will let you know what's up. _________________ XBOX v1.6c
X3CE
Xapt3r 1.6 solderless adapter (works on a 1.6c!)
X3 3294 1.6plus
80 GIG WD
XBMC Dashboard
X3 Control Panel Black
Halo 2 Jewel with Jewel LED Kit (green)
XBOX 360
Stock
Nintendo Wii
Stock
Shark2th Moderator
Joined: Nov 17, 2004 Posts: 5222 Location: Tennessee, USA
Posted: Thu Jan 06, 2005 6:19 pm Post subject:
There is a recovery switch on the Xenium. I have not had to use it but it puts the chip in a safety mode and will recover the bios for you. Try flipping the recovery switch on the chip and re-booting . Remember to flip the switch back when done.
If that doesn't work you will need to burn a recovery CD. Get Qwix and create an iso using local files or download the ISO version of the OS from here http://www.xbox-hq.com/html/modules.php?name=Downloads&d_op=viewdownloaddetails&lid=937 . double click the ISO and make sure to set the slowest burn speed, and that the disc is not mutisession. Power up the xbox by pressing the eject button, place the disk in the tray and close the tray. power off the xbox. disconnect the hd by removing the ide cable, flip the recovery switch and boot the xbox, you should see the same lights you saw the first time you tried recovery if the disk ids good. If you don't you will want to make another disk. _________________ http://twitter.com/HQ_Shark2th
TheModGod Xbox-Hq Legendary Xbox Version: v1.6 Modded: xenium ice
Joined: Apr 18, 2004 Posts: 5303 Location: Greensburg PA
Posted: Thu Jan 06, 2005 6:56 pm Post subject:
When you flip that recovery switch it is going to look for the recover.bin on E drive of your HD, if not found it will go to CDTray...so make sure if you flip it you have the .bin on disk or on E:
Two things could have happend, the bios disk you burned is corrupt and it locked up your chip.
Or, you have a clone. The OS upgrades will automatically lock up a clone chip and render it useless.
So, start with the recovery and see where that leaves you
TheModGod _________________ Good Deals: Death@Hand, funkydopenloven, StaticMind, Slamscaper, PorscheXboxter
Bad Deals: None Yet
Pending Deals: Vanguard
Shark2th Moderator
Joined: Nov 17, 2004 Posts: 5222 Location: Tennessee, USA
Posted: Thu Jan 06, 2005 7:19 pm Post subject:
TheModGod wrote:
you have a clone. The OS upgrades will automatically lock up a clone chip and render it useless.TheModGod
Crap, I didn't even think of that except that if it's an ice, I am not aware that anyone has cloned an Ice chip yet. Only the blue Xenium. _________________ http://twitter.com/HQ_Shark2th
cap269 Xbox-HQ Enthusiast
Joined: Aug 17, 2004 Posts: 33 Location: Alabama, USA
Posted: Thu Jan 06, 2005 9:58 pm Post subject:
I can fix most "dead" Xeniums... except clones. I burn those... _________________ Visit Mid-South Mods for expert mod installation, repairs, and upgrades
Author of the acclaimed Xenium ICE guide
wardawg795 Xbox-HQ Enthusiast Xbox Version: v1.6 Modded: xenium ice
Joined: Dec 29, 2004 Posts: 32 Location: St. Petersburg, Florida
Posted: Thu Jan 06, 2005 11:08 pm Post subject:
Hey guys thanks for all of the help, I was using the wrong media, and that was the problem. Everything up and running now, my baby is back.
Thanks
|
All times are GMT |Page 1 of 1
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum
HQ Network: 29,016 | 
Guests: 23271 | 
Members: 2 
Forums 
This sucks I went to update my Xenium OS, I read all the instructions over and over again, I burnt the iso properly. I did everything that the instructions told me to do, but when I went to recovery mode to flash the update, the screen whent blank, the eject led started blinking green orange and white. What did I do to my Baby Girl
HELP!!!!!!!!!
