Posted: Thu Jan 06, 2005 12:33 am Post subject: Am I Doing The Right Thing? U R ALL SO KIND!
Is it possable to use the chip in my v1.5 xbox to get both my older xbox's modded up? i'd like to use the retail hdd's as i only really want XBMC on them.
i've began on one of them and have it sucssesfully got it fraging away now (even though i Had it doing the xcuter2 logo popping up thing then stock dash, it even booted an emu disc). i have been reading bits and pieces about being able to flash the xboxs own bios, allowing for the chip to be removed (and put back into my 1st modded xbox)
my freinds dont have chips in theirs, I've looked. my freind says the bloke had the chip hanging out the box and when he was done he just cut the wire (he insists their was only 1 wire
TheModGod Xbox-Hq Legendary
Joined: Apr 18, 2004 Posts: 5303 Location: Greensburg PA
Posted: Thu Jan 06, 2005 1:12 am Post subject:
Yes, you could remove the chip from your machine to mod your other machines. As long as they can all run off of the same bios, if not you may have to flash an available bank with the proper bios for the other machine(s). But, once they are chipped and HD's have the apps you want, of course those apps won't work once you remove the chip and put back into the other machines, so you will have three machines with mod files, but only the machine that has the chip in it will be able to run the files.
You could always try softmodding the other machines, taking out the need for a chip but I am not real keen on softmodding so I don't know much about it.
TheModGod
---------------------------
http://www.xbox-hq.com http://www.themodgod.com _________________ Good Deals: Death@Hand, funkydopenloven, StaticMind, Slamscaper, PorscheXboxter
Bad Deals: None Yet
Pending Deals: Vanguard
blighty Xbox-HQ Freak
Joined: Nov 27, 2004 Posts: 881
Posted: Thu Jan 06, 2005 1:38 am Post subject:
I'd need a switch on all three D0's and an easyly available pin strip for the chip.
maybee a neogeo joystick port would work with a bit of this and that.
i got two spare ones,
Sir, Lord, His Highness, The Modgod, when you flash a chip are we flashing the one in the mod chip or the one on the xbox?
can a pc be used to do this?
Shark2th Moderator
Joined: Nov 17, 2004 Posts: 5222 Location: Tennessee, USA
Posted: Thu Jan 06, 2005 3:10 am Post subject:
blighty wrote:
Sir, Lord, His Highness, The Modgod
Oh gawd, he'll never be the same! He may still be able to mod Xboxes but his head WILL NOT fit through a door. _________________ http://twitter.com/HQ_Shark2th
custom-xmodz Xbox-HQ Freak
Joined: Aug 28, 2004 Posts: 796 Location: Wales, UK
Posted: Thu Jan 06, 2005 6:48 pm Post subject:
He meant flashing the chip. Basically you are goint to need to buy 2 more chips or softmod/tsop flash the other 2 xbox's
DJH
TheModGod Xbox-Hq Legendary
Joined: Apr 18, 2004 Posts: 5303 Location: Greensburg PA
Posted: Fri Jan 07, 2005 3:31 am Post subject:
HA..thanks for answering that for me...
I missed those replies...
TheModGod
---------------------------
http://www.themodgod.com http://www.xbox-hq.com _________________ Good Deals: Death@Hand, funkydopenloven, StaticMind, Slamscaper, PorscheXboxter
Bad Deals: None Yet
Pending Deals: Vanguard
|
All times are GMT |Page 1 of 1
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum
HQ Network: 45,547 | 
Guests: 29459 | 
Members: 0 
Forums 
