SimonG156 Xbox-HQ User Xbox Version: v1.1, 360 Premi Modded: Xenium ICE Solderless
Joined: Dec 01, 2005 Posts: 14
Posted: Sat Dec 16, 2006 3:40 pm Post subject: AID 3.1 installs XBMC, fatal error sources.xml is empty
I have a xenium chipped 1.1 xbox with xbmc installed with AID 2. I just uograded to AID 3.1 and chose Install C Dashboard, XBMC, Retail E, and as the files copy I hear a "boing" noise on about 5, including sources.xml
When I restart I get XBMC Fatal Error q:\userdata\sources.xml line o empty. FTP started...
I ftp and see a Q drive with an empty sources.xml. I tried to copy sources from my softmodded AID 3.1 XBMC xbox but get file access denied.
If I reboot and run Xenium I can ftp but see just c d e. Sources file seems ok there.
C ends up with 189mb free after the install.
Any ideas?
PS Just put XBMC from AID 3.0 back and it is running fine. My 3.1 AID disk is ok because I installed XBMC on my softmodded box
Mzakos1 Xbox-HQ User Xbox Version: 1.6 Modded: Duo 2 with 5032 bios
Joined: Jan 27, 2007 Posts: 10 Location: Palatine, Illinois
Posted: Sat Feb 03, 2007 1:59 am Post subject: I have the same problem
Additionally I cant FTP in to see anything. Did you figure this out?
cabbot Xbox-HQ Freak Xbox Version: 1.1 Modded: SID4.5
Joined: Dec 16, 2005 Posts: 748 Location: Ontario , Canada
Posted: Sat Feb 03, 2007 2:28 am Post subject:
isnt xbmc supposed to be on E? _________________
Mzakos1 Xbox-HQ User Xbox Version: 1.6 Modded: Duo 2 with 5032 bios
Joined: Jan 27, 2007 Posts: 10 Location: Palatine, Illinois
Posted: Sat Feb 03, 2007 3:18 am Post subject: I'm ready to give up.
Im having the same problem but my error reads:
XBMC Fatal Error:
T:guisettings.xml Line 0
Error document empty
Does anyone have any ideas?
cabbot Xbox-HQ Freak Xbox Version: 1.1 Modded: SID4.5
Joined: Dec 16, 2005 Posts: 748 Location: Ontario , Canada
Posted: Sat Feb 03, 2007 9:49 am Post subject: Re: I'm ready to give up.
Mzakos1 wrote:
Im having the same problem but my error reads:
XBMC Fatal Error:
T:guisettings.xml Line 0
Error document empty
Does anyone have any ideas?
ive had that one before when i was a dumbass and tried updating xbmc while ftpin to xbmc lol....
if youre updating xbmc it has to be through a different dash....i ftp'd the update through aid disc personally....
im not sure if thats what you did...but thats whats happened to me a cpl times when i just wasnt thinkin lol.... _________________
Mzakos1 Xbox-HQ User Xbox Version: 1.6 Modded: Duo 2 with 5032 bios
Joined: Jan 27, 2007 Posts: 10 Location: Palatine, Illinois
Posted: Sat Feb 03, 2007 2:12 pm Post subject:
I used AID 3 to start from scratch, no FTP in. I have tried over and over to reload everything with AID 3.10 with no luck.
cabbot Xbox-HQ Freak Xbox Version: 1.1 Modded: SID4.5
Joined: Dec 16, 2005 Posts: 748 Location: Ontario , Canada
Posted: Sat Feb 03, 2007 2:31 pm Post subject:
did you make a backup of your old xbmc? cause when it says ftp started....you can ftp and replace the sources with original... _________________
Mzakos1 Xbox-HQ User Xbox Version: 1.6 Modded: Duo 2 with 5032 bios
Joined: Jan 27, 2007 Posts: 10 Location: Palatine, Illinois
Posted: Sat Feb 03, 2007 2:44 pm Post subject:
yea I backed it up. The problem is I cant FTP in. It tells me FTP started but gives me a static IP of 192.168.0.2. This is not in my routers DHCP table of clients. It should be 192.168.1.102. It seems as the XBOX is getting a static IP. I did notice that on the screen of AID 3.10 it says Static Version. I suspect this might be one of the reasons I cant FTP in. Are there 2 different versons of AID 3.10, static and DHCP?
cabbot Xbox-HQ Freak Xbox Version: 1.1 Modded: SID4.5
Joined: Dec 16, 2005 Posts: 748 Location: Ontario , Canada
Posted: Sat Feb 03, 2007 3:02 pm Post subject:
ya theres a dhcp version as well....couldnt you lose the router for a sec and connect direct? _________________
Mzakos1 Xbox-HQ User Xbox Version: 1.6 Modded: Duo 2 with 5032 bios
Joined: Jan 27, 2007 Posts: 10 Location: Palatine, Illinois
Posted: Sat Feb 03, 2007 3:05 pm Post subject:
That will be tough but since I'm desperate I will need to try it. So you are saying there are 2 different versions of AID 3.10, one static and one DHCP? How to I get the DHCP one?
Mzakos1 Xbox-HQ User Xbox Version: 1.6 Modded: Duo 2 with 5032 bios
Joined: Jan 27, 2007 Posts: 10 Location: Palatine, Illinois
Posted: Sat Feb 03, 2007 6:42 pm Post subject:
well I couldn't connect directly as I don't have a crossover cable but I did try one click with AID 3.10 and I chose Avalaunch instaed of XBMC this time and it worked but I want XBMC as my default dash. I will read some more but if anyone knows how to set up XBMC as the default dash please let me know or provide a link to instructions.
Thanks!!
|
All times are GMT |Page 1 of 1
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum
HQ Network: 11,273 | 
Guests: 5893 | 
Members: 0 
Forums 
