matt1228 Xbox-HQ Enthusiast Xbox Version: xbox 1.1 Modded: XECUTER 2.6 CE
Joined: Jul 12, 2006 Posts: 26 Location: chicago
Posted: Fri Aug 18, 2006 5:53 pm Post subject: ok installed my chip... what the #$%@
when i have the chip on it frags and the hdd led blinks i have a hdd in there but it has been unlocked and all the files were destroyed but when i turn the chip off it loads m$ and stops and gives me a error code 7 and like 12 i have a xecuter 2.6 ce solderless
hoyas111 Xbox-HQ Elite Member Xbox Version: xbox 1.1 Modded: XECUTER 2.6 CE
Joined: Jun 17, 2006 Posts: 357
Posted: Fri Aug 18, 2006 7:25 pm Post subject:
Error 7 - kernel - HDD timeout
Most of the times, the IDE cable is not properly connected when you see this error. Please reattach the ide cable. Not only to the harddisk drive but also to the dvd drive. ALso try to reconnect the ide cable to the motherboard.
Press pretty hard so it goes all the way in. Make sure it is seated straight and proper in the drives and the motherboard. If you still have an error 7. Try another ide cable. If that won't work try another harddisk. If there is still no go, try to set the jumpers on the rearside of the harddisk drive. Set it to master or cable select. If still no succes, good luck and sell your xbox to me rolleyes.gif
Error 12 - kernel - DVD parameters (PIO/DMA), and kernel - DVD
timeout
But also make sure the yellow cables are properly connected to the motherboard and the dvd drive.
1. Make sure ide cables are connected good.
2. Make sure the yellow cables are good and properly connected.
3. Still no succes? Try another dvd drive of which you are sure it is working.
If your HD was unlocked, and all the files were deleted.. When you power on with the chip on, are you at the Xecuter screen? If all the important files were destroyed, like on C, sorry to say, but i think your screwed
Greven Xbox-Hq Genius Xbox Version: Xbox V1.6 Modded: Xecuter 3 CE
Joined: Jan 19, 2006 Posts: 2755 Location: Calgary, Alberta, Canada
Posted: Fri Aug 18, 2006 7:29 pm Post subject:
Try coldbooting AID if you can.
How far into the boot process do you get? Immediate frag, or after teh flubber or after the logo? _________________ Hotswap|HDD Upgrade|X3 Guide
hoyas111 Xbox-HQ Elite Member Xbox Version: Xbox V1.6 Modded: Xecuter 3 CE
Joined: Jun 17, 2006 Posts: 357
Posted: Fri Aug 18, 2006 8:21 pm Post subject:
Yeah, your only hope is trying AID.
matt1228 Xbox-HQ Enthusiast Xbox Version: xbox 1.1 Modded: XECUTER 2.6 CE
Joined: Jul 12, 2006 Posts: 26 Location: chicago
Posted: Fri Aug 18, 2006 8:22 pm Post subject:
when the chip is on it is a frag when i start it up when it is off i get all the the way to the big x then a error
Greven Xbox-Hq Genius Xbox Version: Xbox V1.6 Modded: Xecuter 3 CE
Joined: Jan 19, 2006 Posts: 2755 Location: Calgary, Alberta, Canada
Posted: Fri Aug 18, 2006 8:24 pm Post subject:
Have you flashed the chip yet? It may frag when the chip is enable because there is no bios written to the banks. Have you tried bank 2? _________________ Hotswap|HDD Upgrade|X3 Guide
matt1228 Xbox-HQ Enthusiast Xbox Version: xbox 1.1 Modded: XECUTER 2.6 CE
Joined: Jul 12, 2006 Posts: 26 Location: chicago
Posted: Fri Aug 18, 2006 8:27 pm Post subject:
aid wont even load the dvd rom will just spin alot i have 2 dvd roms one wit the 2 wholes and one with none i think it is a thomson? also i cant flash the chip cuz it just frags when i have it on
Greven Xbox-Hq Genius Xbox Version: Xbox V1.6 Modded: Xecuter 3 CE
Joined: Jan 19, 2006 Posts: 2755 Location: Calgary, Alberta, Canada
Posted: Fri Aug 18, 2006 8:59 pm Post subject:
Do you have a programmer that you can program the chip with? Or another working xbox? _________________ Hotswap|HDD Upgrade|X3 Guide
hellblazer55 V.I.P. Lifetime
Joined: Oct 03, 2005 Posts: 6381 Location: Canada
Posted: Fri Aug 18, 2006 11:10 pm Post subject:
have you checked the connections on your chip, they may have come loose. _________________
DJRiss Xbox-HQ Enthusiast Xbox Version: Xbox V1.6 Modded: Xecuter 3 CE
Joined: Aug 09, 2006 Posts: 32
Posted: Sat Aug 19, 2006 3:57 am Post subject:
Check your D0 to make sure it is seated and in the correct place what adapter did you use?
|
All times are GMT |Page 1 of 1
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum
HQ Network: 17,110 | 
Guests: 5069 | 
Members: 0 
Forums 
