Joined: Feb 01, 2006 Posts: 2508 Location: Pensacola, FL
Posted: Fri Oct 06, 2006 2:08 pm Post subject: Xecuter 3 Frag
Ok my x3 i just got is fragging, any1 wannq help me out?
Pinheader installation, soldered to the back D0. Im getting 1 Green/Red(Green=flash protect on Red=Flash Protect off) LED and 2 blue. It keeps fragging tho, i get my original M$ Dash wen unplugged from it. I have all parts installed, th piece between mobo and power/eject board, and the X# controll panel for bios switching. _________________ Hotswap Tutorial|FTP Tutorial|HyperX Flashing Tutorial
Pson Xbox-Hq Genius
Joined: May 06, 2006 Posts: 1155 Location: Philly, PA
Posted: Fri Oct 06, 2006 2:15 pm Post subject:
Wow dude how many chips and HDD are you going to get...lol. Wow man wow...I would recheck your solder points it sounds like its not on right _________________ The mighty V6 Passat came to chew bubble gum and kick%^* and shes all out of bubble gum!
j8994 Moderator
Joined: Feb 05, 2006 Posts: 1853 Location: Tennessee, USA
Posted: Fri Oct 06, 2006 3:13 pm Post subject:
check the conecction and make sure there aint no solder splashes. also check the bios, reflash the chip, please tell me you got a programmer for it, ahhh _________________ Please post all PC Questions at PC-HQ.com
TheRealHypnotiX Moderator
Joined: Feb 01, 2006 Posts: 2508 Location: Pensacola, FL
Posted: Fri Oct 06, 2006 6:36 pm Post subject:
Ok 1st, i dont like the HyperX it is a pos, so i baught the X3. Now to answer somebody who typed something logical. No i dont ave a programmer for it, and i tried reconencting it a couple times already and i havnt found any solder splash anywhere. _________________ Hotswap Tutorial|FTP Tutorial|HyperX Flashing Tutorial
j8994 Moderator
Joined: Feb 05, 2006 Posts: 1853 Location: Tennessee, USA
Posted: Fri Oct 06, 2006 6:38 pm Post subject:
well it ma ybe the bios, see if it offers any other way to flash, i dunno never had a x3 or looked at one _________________ Please post all PC Questions at PC-HQ.com
Pson Xbox-Hq Genius
Joined: May 06, 2006 Posts: 1155 Location: Philly, PA
Posted: Fri Oct 06, 2006 6:41 pm Post subject:
Well glad to see your in a good mood today. Its shouldn't be fraging unless your solder points are not right. I would think if it was the proramer it would still boot but to the cromwell(sp?) I would put some solder pics up and a pic of what it looks like fraging too _________________ The mighty V6 Passat came to chew bubble gum and kick%^* and shes all out of bubble gum!
TheRealHypnotiX Moderator
Joined: Feb 01, 2006 Posts: 2508 Location: Pensacola, FL
Posted: Fri Oct 06, 2006 6:58 pm Post subject:
ok srry about that, just getting mad at this thing. Anyway, i can tell u wat fragging looks like, but i wont be able to get a good soldering pic. It turns on, off, on, off, on then stays on and the eject LEDs start blinking, and theres no audio and no video at all. _________________ Hotswap Tutorial|FTP Tutorial|HyperX Flashing Tutorial
Pson Xbox-Hq Genius
Joined: May 06, 2006 Posts: 1155 Location: Philly, PA
Posted: Fri Oct 06, 2006 6:59 pm Post subject:
TheRealHypnotiX wrote:
ok srry about that, just getting mad at this thing. Anyway, i can tell u wat fragging looks like, but i wont be able to get a good soldering pic. It turns on, off, on, off, on then stays on and the eject LEDs start blinking, and theres no audio and no video at all.
Yeah that to me seems to be your solder job. I had the same iusse when I soldered mine...lol. _________________ The mighty V6 Passat came to chew bubble gum and kick%^* and shes all out of bubble gum!
TheRealHypnotiX Moderator
Joined: Feb 01, 2006 Posts: 2508 Location: Pensacola, FL
Joined: Feb 01, 2006 Posts: 2508 Location: Pensacola, FL
Posted: Fri Oct 06, 2006 7:11 pm Post subject:
ok scratch that lol, i got it working, whats the best bios for this chip? and wen u tell me this please tell me what selection the switches should have for that bios! _________________ Hotswap Tutorial|FTP Tutorial|HyperX Flashing Tutorial
TheRealHypnotiX Moderator
Joined: Feb 01, 2006 Posts: 2508 Location: Pensacola, FL
Posted: Fri Oct 06, 2006 7:47 pm Post subject:
scratch that 2, i took the chip off so i could put electrical tape on the solder points on the bottom and i put it pomn ana dlal back otgether and now fragging again _________________ Hotswap Tutorial|FTP Tutorial|HyperX Flashing Tutorial
TheRealHypnotiX Moderator
Joined: Feb 01, 2006 Posts: 2508 Location: Pensacola, FL
Posted: Fri Oct 06, 2006 8:13 pm Post subject:
i just ripped up a trace going to the D0 point on the back......i think im pissed now, so now i must ask if any1 has a 1.2/1.3 mobo, how much would u want for it and a pinheader and D0 wire soldered into it for me? _________________ Hotswap Tutorial|FTP Tutorial|HyperX Flashing Tutorial
hellblazer55 V.I.P. Lifetime
Joined: Oct 03, 2005 Posts: 6381 Location: Canada
Posted: Fri Oct 06, 2006 10:21 pm Post subject:
man between you and robzzombi your both brutal LOL, you know in order to have a modding business, you have to be able to fix that kind of problem besides just replacing it. You might find you will loose more money than make money, cause you cant charge some one for your screw ups.
Im gonna have to give you both a class, but you two are going to have to get the tools, as some can be made also which I can help you with also, and some some junked boards, like motherboards from stereos or computers or anything electronic that no longer works.
You guys need some practice application boards to monkey with and that way you dont have to worry about screwing them up since they dont work anyways.
Essentially thats how I taught myself. And I took no classes, its easy and straight forward.
So if you want classes Ill teach you and zombi, but the supplys you guys have to get yourselves as I cant supply them for you lol. _________________
Pson Xbox-Hq Genius
Joined: May 06, 2006 Posts: 1155 Location: Philly, PA
Posted: Sat Oct 07, 2006 2:33 am Post subject:
TheRealHypnotiX wrote:
i just ripped up a trace going to the D0 point on the back......i think im pissed now, so now i must ask if any1 has a 1.2/1.3 mobo, how much would u want for it and a pinheader and D0 wire soldered into it for me?
Try j4889 out. Hes got great deals and just sold two the other day _________________ The mighty V6 Passat came to chew bubble gum and kick%^* and shes all out of bubble gum!
hellblazer55 V.I.P. Lifetime
Joined: Oct 03, 2005 Posts: 6381 Location: Canada
Posted: Sat Oct 07, 2006 2:37 am Post subject:
Or you can try repairing the broken trace _________________
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum
HQ Network: 30,300 | 
Guests: 25154 | 
Members: 0 
Forums 
