Joined: Apr 18, 2005 Posts: 44 Location: silverdale, washington
Posted: Mon Apr 17, 2006 5:48 am Post subject: after modding attempt no power to the console
hi gents hopefully you can all help me. I modded my xbox which is a version 1 with an xecuter 3 ce with no problems. I attempted to mod my friends which is a v 1.6 with the same chip. I had everything installed but i thought the lcb board had bad solder joints so i took that off and used the wire install. Everything worked except the chip until that point i.e. i could get to the xbox original dash. Now since i have done that it wont even power on but i do get the led on the chip to light up. The xbox has noooo power not even the fan will spin and the eject/power leds will not light. Im thinking that bmaybe i fucked up a track running between solder points. I checked the board there is no solder splashes. Im guessing that i burnt the board or something any ideas??
barry _________________ xbox V 1.0
xecuter 3 ce modchip x3 bios 3108
retail hdd
80 mm green 12v green led fan upgrade
custom 8 led green glowing jewel
ata100 ide cable upgrade
j8994 Moderator
Joined: Feb 05, 2006 Posts: 1853 Location: Tennessee, USA
Posted: Mon Apr 17, 2006 6:06 am Post subject:
remove the chip if it work then the install was done wrong
then try these
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum
HQ Network: 34,185 | 
Guests: 26126 | 
Members: 1 
Forums 
