Posted: Fri May 05, 2006 4:06 am Post subject: xbox just goes on and off after x3 chip was installed.
i just installed my mod chip and now when i turn my xbox on it goes on and off three times then just stays on with the flashing light can anybody help me out out there.
j8994 Moderator
Joined: Feb 05, 2006 Posts: 1853 Location: Tennessee, USA
Joined: Feb 07, 2005 Posts: 2743 Location: Florida
Posted: Fri May 05, 2006 10:28 pm Post subject:
Check the d0 wire. It might be loose. _________________
roo465 Moderator
Joined: Apr 29, 2005 Posts: 982 Location: ACT, Australia
Posted: Sat May 06, 2006 7:05 am Post subject:
Have you flashed a bios image to your chip? Also, have you set the X3 switch to the correct setting?
You have to enable FlashBios the first time to flash an X3 bios to your chip. You need to set the switches to On, On, Off, Off, and have switch 5 (flash protect) disabled on the chip as well as the X3 switch.
Have a look Here for more Xecuter 3 information and tutorials _________________
DavGerm4 Xbox-HQ Newbie Xbox Version: Xbox v1.4 Modded: Xecuter 3
Joined: May 24, 2006 Posts: 1
Posted: Thu May 25, 2006 6:17 pm Post subject: I had the same problem
When I flashed the bios and I turned it on, it did that same thing. I think it was because of the bios version I had. I put a bios for v1.0 on my xbox, but mine is a v1.6. We re-flashed it with the correct bios, and it worked fine after that.
|
All times are GMT |Page 1 of 1
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum
HQ Network: 39,871 | 
Guests: 28644 | 
Members: 0 
Forums 
