moneymover Xbox-HQ Newbie Xbox Version: V1.0 Modded: Xenium Ice SP
Joined: Jul 28, 2005 Posts: 7
Posted: Tue Apr 04, 2006 11:08 pm Post subject: My Xbox with xenium ice chip frags
I have xbox with xenium ice with Evox and Avaulanch on it. It worked almost eight months or so and now it frags with green and red light. green light three times and then changes to green red, the light on the chip is red. If I take out the chip, it loads to M$ deshboard. I even tried to put the recovey bin file through cd but it does not take. I even can not do the FTP to load the recovery file. Please help.
dangermouse Moderator
Joined: Jun 24, 2005 Posts: 972 Location: Tucson
Posted: Wed Apr 05, 2006 12:41 am Post subject:
It may be a bios issue. Reflash flash it. You'll find step by step insturctions in the IceGuide manual.
AID has a bios package in it. Just extract the iso. _________________ Xenium Ice 2.3.1 OS
200gb Seagate HDD
|HOTSWAP|Upgrade HDD|
moneymover Xbox-HQ Newbie Xbox Version: V1.0 Modded: Xenium Ice SP
Joined: Jul 28, 2005 Posts: 7
Posted: Wed Apr 05, 2006 7:29 pm Post subject:
Dangerousmouse: While I am downloading the AID package.
Question: The Bios pack from AID, should I extract it and burn the disk.
I am not sure, how to put the bios agian as I can not use the FTP at this time. since I do not see evox or anything other then M$ dashboard.
Can you please walk me through? I am sorry but haven't touched the xbox since long time to do something like this.
Thanks for your help.
dangermouse Moderator
Joined: Jun 24, 2005 Posts: 972 Location: Tucson
Posted: Wed Apr 05, 2006 8:05 pm Post subject:
Extract the iso using c-xbox tool or what ever you have. Burn the bios folder to a cd-rw @ 1x (sometimes burns are more successful if more than a few megs are burned). Boot the xenium os and go to the add item menu. Select flash and then the d: drive. You should see the folder you burned onto the disc. Choose a bios and flash the chip.
You can flash two different bios files to the chip if you select the 512k files. _________________ Xenium Ice 2.3.1 OS
200gb Seagate HDD
|HOTSWAP|Upgrade HDD|
moneymover Xbox-HQ Newbie Xbox Version: V1.0 Modded: Xenium Ice SP
Joined: Jul 28, 2005 Posts: 7
Posted: Wed Apr 05, 2006 8:39 pm Post subject:
Thanks. I will try it and then post my outcome.
moneymover Xbox-HQ Newbie Xbox Version: V1.0 Modded: Xenium Ice SP
Joined: Jul 28, 2005 Posts: 7
Posted: Thu Apr 06, 2006 9:26 pm Post subject:
I have resolve the issue.
Take out the chip and socket. clean the pins and mother board.
Hook up the original MS controller ( which is kind of broken and thus I was not using it before, I think that was my mistake).
Put the chip back with recovery switch on recovery side, and wired the d0. fired up and it shows the evox skin and then get it from HD. shut down by it self. Switch back the recovey switch back to normal. Turn on the box and all set.
Hope this may help someone with fragging issue. Make sure your chip is on recovey and seated properly and also you are using the original MS controoler.
Thanks Dangerousmouse for your help.
|
All times are GMT |Page 1 of 1
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum
HQ Network: 30,822 | 
Guests: 23387 | 
Members: 2 
Forums 
