slayerproxb Xbox-HQ Experienced Xbox Version: v1.0 Modded: Xecuter 3
Joined: Jan 27, 2005 Posts: 183 Location: Rantoul, IL
Posted: Wed Dec 28, 2005 3:02 am Post subject: plaese help
K first i have been modding with chips, exploits and tsops for some time. I started back when the 29 wire beast enigmah x was around so i know a thing or two. I have installed 60+ modchids and have never had a single problem. Today i got in an X3CE for an Xbox 1.4. I used the pinheader install and soldered the d0 lan and HD wires and put in the power adapter blah blah blah. Anyways heres my problem i put it al back together and now the Xbox wont even turn on? What is this? I have never had anything like this before. I have cheacked and rechecked everthing 2 or 3 times. Do you have any suggestions? I would greatly apreciate it.
Slayer _________________ v1.0, 300GB, X3 (Update In Progress)
v1.2, 300GB, X3CE
360 Pro 60GB, XCM Black Light Case
360 Pro 60GB, WIP DVD Swap Firmware Upgrade
--------------------------------------------------------------
I hate to advocate drugs, alcohol, violence, or insanity to anyone, but they've always worked for me. Hunter S. Thompson
roo465 Moderator
Joined: Apr 29, 2005 Posts: 982 Location: ACT, Australia
Posted: Wed Dec 28, 2005 3:29 am Post subject:
Firstly, please don't double post, I see you started a new thread earlier, with the same topic.
You just need to give people some time to reply, and if they don't straight away, bump the topic back to active later on
Now, i would suggest double checking the adapter for the power/eject switch wires, make sure its plugged in to the chip, the mobo, and the switch unit.
If theres no problem here check all soldering for splashes, shorts, dry joints etc. just in case. _________________
slayerproxb Xbox-HQ Experienced Xbox Version: v1.0 Modded: Xecuter 3
Joined: Jan 27, 2005 Posts: 183 Location: Rantoul, IL
Posted: Wed Dec 28, 2005 4:28 am Post subject:
As far as i can tell everything is clean, i have tried a number of things the D0 loooks good but could it cause the no boot problem? _________________ v1.0, 300GB, X3 (Update In Progress)
v1.2, 300GB, X3CE
360 Pro 60GB, XCM Black Light Case
360 Pro 60GB, WIP DVD Swap Firmware Upgrade
--------------------------------------------------------------
I hate to advocate drugs, alcohol, violence, or insanity to anyone, but they've always worked for me. Hunter S. Thompson
roo465 Moderator
Joined: Apr 29, 2005 Posts: 982 Location: ACT, Australia
Posted: Fri Dec 30, 2005 12:41 am Post subject:
As far as I know, if there was a problem with the D0, this would prevent the mod (hacked bios) booting, but it should still boot with mod off (retail bios), like when you long-press power button to power up.
Hmm, dunno. Have a look at your power supply, connections, etc. because if you had the mobo out to install the chip, something might not have been plugged back in properly.
Does your xbox boot if you plug the power/eject wires straight into the mobo, instead of the adapter? _________________
|
All times are GMT |Page 1 of 1
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum
HQ Network: 11,278 | 
Guests: 5898 | 
Members: 0 
Forums 
