Posted: Sat Nov 05, 2005 3:04 am Post subject: XboxHDmaker problem uprgrading with (followed tut to a tee)
ok i have a softmodded xbox and i followed the tut for upgrading usuing XboxHDmaker, the process finished fine, every step i followed finished like it said it would on the tut, i downloaded and burned AID v2.1 final (it works cuz i installed evox on other hdd with it) i put new hdd in xbox and AID dvd in xbox then booted it up and it says "xbox needs service" blah blah with 06 in top left corner,
if i did sumthing wrong would the xboxHDmaker process complete like it did, ??? can anyone help me at all please
any help would be greatly appreciated
Thnx in advance
thalungz Xbox-HQ Newbie
Joined: Nov 04, 2005 Posts: 9
Posted: Sat Nov 05, 2005 4:13 am Post subject:
Guess im on my own then thnx anyways
Turn2 Xbox-HQ Elite Member
Joined: Oct 28, 2005 Posts: 290 Location: Tennessee, USA
Posted: Sat Nov 05, 2005 6:01 am Post subject:
A little more information might help, Hard drive you are trying to use etc.
thats what the site said, so i dont know whats wrong, i followed the tut on here and everything worked fine ( so it said ) but then it doesnt get past dash, says error needs servicing.. 06,
and thank you for your reply,
Turn2 Xbox-HQ Elite Member
Joined: Oct 28, 2005 Posts: 290 Location: Tennessee, USA
Posted: Sat Nov 05, 2005 6:40 am Post subject:
Im kinda new here myself,,, but from what Ive read and done before myself, It sound like it doesn't know where to find your dash.
One thing to try that may be simple is to burn an AID disk and put it in your xbox dvd drive and see if it will boot to that. If so I think that means your softmod is working and you should just be able to install from that disk. If it doesn't sounds like your going to have to pull the hdd and try it again. Like I said if you have your files on your PC you will get it going eventualy as long as you have the eeprom.bin that came from the xbox that you are working on. _________________
Turn2 Xbox-HQ Elite Member
Joined: Oct 28, 2005 Posts: 290 Location: Tennessee, USA
Posted: Sat Nov 05, 2005 6:49 am Post subject:
Actualy I just looked up the code it says that it can't unlock the HDD
but you can still try the stuff above if you like.
But from my understanding you still have to have the eeprom.bin that came from the xbox that you are working on ( not saying that you don't but just to help any other new folks that may read this thread) as they are unique to each xbox and that is where the lock code comes from. _________________
thalungz Xbox-HQ Newbie Xbox Version: 1.0 Modded: softmod SID3.0 AID 2.1 40
Joined: Nov 04, 2005 Posts: 9
Posted: Sat Nov 05, 2005 6:50 am Post subject:
i tried booting the new hdd with the aid dvd, same thing happens, i also used it to install config magic on my other hdd so i could get the eeprom.bin so i know the dvd is working, i think i am just gonna have to try again, i am just gonna make a new xboxHDamker image and see if that helps, im re transfering the E: and C: folders from my softmodded hdd again because, i used e: and c: folders from before config magic and evox wwhere installed, maybe thats why , so hopefully a new xbhdm image will work * fingers crossed *
thanks again for your help, i will post what happens.
oh and btw do i need to do anything special after i install new hdd in xbox or do i just use the aid dvd to boot? (put aid dvd in xbox and turn on)
thalungz Xbox-HQ Newbie Xbox Version: 1.0 Modded: softmod SID3.0 AID 2.1 40
Joined: Nov 04, 2005 Posts: 9
Posted: Sat Nov 05, 2005 6:57 am Post subject:
Quote:
Actualy I just looked up the code it says that it can't unlock the HDD
i copied and pasted the search results for that code, i didnt type them in my post, and wouldnt Xboxhdmaker tell me that my drive isnt unlockable rather than i succesfully did it ?
and if it isnt unlockable does that mean it is gonna only be good for my pc?
Turn2 Xbox-HQ Elite Member
Joined: Oct 28, 2005 Posts: 290 Location: Tennessee, USA
Posted: Sat Nov 05, 2005 7:01 am Post subject:
should work just like your other hdd did no disk needed to boot. but the AID disk always comes in handy to get all of the other goodies off of there
I personly like the UnleashX dash as it has the same file manager as the AID disk does. _________________
thalungz Xbox-HQ Newbie Xbox Version: 1.0 Modded: softmod SID3.0 AID 2.1 40
Joined: Nov 04, 2005 Posts: 9
Posted: Sat Nov 05, 2005 7:08 am Post subject:
ya i have been using it for around 5 months now , i only installed evox to try to get a backup of my eeprom, but that didnt work lol so i used configmagic , but anyways,lol ya unleashx is definatly fun,
Turn2 Xbox-HQ Elite Member
Joined: Oct 28, 2005 Posts: 290 Location: Tennessee, USA
Posted: Sat Nov 05, 2005 7:09 am Post subject:
thalungz wrote:
Quote:
Actualy I just looked up the code it says that it can't unlock the HDD
i copied and pasted the search results for that code, i didnt type them in my post, and wouldnt Xboxhdmaker tell me that my drive isnt unlockable rather than i succesfully did it ?
and if it isnt unlockable does that mean it is gonna only be good for my pc?
If someone has posted that the hard drive is lockable check to see what they were using to lock it from it may be that the person who got it to work may have been using a mod chip instead of a softmod. I don't see that that would make a difference but it might.
I would plug in the old hdd drive before I done anything else just to make sure that it still works and If it does, I would be very careful of what I did with it until I got the new one working. _________________
Turn2 Xbox-HQ Elite Member
Joined: Oct 28, 2005 Posts: 290 Location: Tennessee, USA
Posted: Sat Nov 05, 2005 7:16 am Post subject:
thalungz wrote:
ya i have been using it for around 5 months now , i only installed evox to try to get a backup of my eeprom, but that didnt work lol so i used configmagic , but anyways,lol ya unleashx is definatly fun,
Dang, I just modded my first Xbox 2 weeks ago
anyways I would try the 2nd tutorial link above that I gave you ,if you were going to try it again from scratch, as I got it on the first try with that one.
I made all of my screw ups since then _________________
thalungz Xbox-HQ Newbie Xbox Version: 1.0 Modded: softmod SID3.0 AID 2.1 40
Joined: Nov 04, 2005 Posts: 9
Posted: Sat Nov 05, 2005 7:19 am Post subject:
yea it still works fine, why wouldnt it, i amcopying E: and C: folders as we speak from it, and i was playing fable on it before i stared re copying
thalungz Xbox-HQ Newbie Xbox Version: 1.0 Modded: softmod SID3.0 AID 2.1 40
Joined: Nov 04, 2005 Posts: 9
Posted: Sat Nov 05, 2005 7:23 am Post subject:
Quote:
anyways I would try the 2nd tutorial link above that I gave you ,if you were going to try it again from scratch, as I got it on the first try with that one.
will do, thnx again,
Turn2 Xbox-HQ Elite Member
Joined: Oct 28, 2005 Posts: 290 Location: Tennessee, USA
Posted: Sat Nov 05, 2005 7:24 am Post subject:
sorry bout that replys were popping up faster than I could post them. was just trying to help. but as you can see Im the newbie here. _________________
|
All times are GMT |Page 1 of 1
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum
HQ Network: 39,394 | 
Guests: 28029 | 
Members: 0 
Forums 
