Posted: Wed Jul 14, 2004 7:21 pm Post subject: xbox ?fragging? flash green and yellow, then green and red
why is it flashing green and yellow when i turn it on, then green and redafter a few seconds? my xbox is modded with Evo X by the way.
spongebob Xbox-HQ Enthusiast
Joined: Jul 10, 2004 Posts: 26
Posted: Wed Jul 14, 2004 11:35 pm Post subject:
Im not sure if this will help but this is from the ozoxudus site
Flashing LED Error Codes.
Flashing RED & GREEN (FRAG): Probably a bad chip or bad
installation, FRAG indicates that your d0 wire is installed correctly.
· Check that the Xenium is installed correctly and that it’s
LED is lit Red. If your Xenium’s LED is not lit then you may
have a V1.5 console (See Part 4b of this manual).
· Resolder the LPC points.
SOLID GREEN/No EJECT/No AUDIO/No VIDEO: Probably a bad
solder point or overheated console.
· Check all your solder points again.
· It could also be a heat problem, make sure your fan is
connected and don't put your xbox near heat sources. You
can also try to open the top of the xbox and check if it goes
better.
SOLID GREEN/No AUDIO/No VIDEO: This is probably a problem
with your audio settings. Try to boot your XBox with a standard A/V
pack instead of a HD pack.
ORANGE/GREEN Flashing: No AUDIO/VIDEO (A/V) pack.
This may be caused by solder splash on the motherboard or a damaged
track.
ORANGE Flashing: This may also be down to a solder splash on the
board or a damaged track. May also be due overheating.
SOLID RED: System overheated, hardware failure! _________________ halo xbox ver. 1.4
xenium ice
160 gig maxtor
evox m8
forahobby Administrator
Joined: May 22, 2003 Posts: 23945 Location: NSW, Australia
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum
HQ Network: 19,938 | 
Guests: 13891 | 
Members: 1 
Forums 
