Joined: Apr 18, 2004 Posts: 5303 Location: Greensburg PA
Posted: Tue Jul 19, 2005 5:07 pm Post subject: 1.6 motherboard with X3 pin header and chip installed
I have a 1.6 version motherboard that I repaired available for sale.
It had a bad standby resistor from being put into a case that did not originally house a 1.6 board.
Also, I did not install the pin header and LPC rebuild, but I did touch it up a bit and remove some of the extra solder that was on it.
I popped on an X3 mod chip, soldered the LAN, HD and D0 wires, and the 5v wire.
Popped a chip on and boots up to flashbios with no problems whatsoever.
Without chip and wires - $75.00 plus 8.95 Shipping
With the chip and wires, -$120.00 plus 8.95 Shipping.
If you want, I can even throw in a stock unlocked HD, and flash the chip if you want a chip with it.
I can also add an X3 Control Panel for an additional $59.00 and $5.00 shipping.
The X3 Control Panel is brand new and unopened. It is still sealed in the anti-static bag and X3 box. It includes all wires/harnesses, the X3 pro switch, two USB ports, and the X3 LCD.
For someone looking to get into a mod without having to do much work, this is a great solution!
No trades accepted at this time. Looking for paypal or money order payments only. _________________ Good Deals: Death@Hand, funkydopenloven, StaticMind, Slamscaper, PorscheXboxter
Bad Deals: None Yet
Pending Deals: Vanguard
dprules Xbox-HQ Elite Member Xbox Version: v1.0 Modded: xenium ice + U.S.A.
Joined: Jun 16, 2005 Posts: 226 Location: porterville california
Posted: Sat Jul 23, 2005 10:15 pm Post subject:
ok since you fixed the resistor since someone has already tried to install it into a different xbox version do you think it will work with a v1.0 xbox? _________________ xbox v1.0
Xenium ICE + U.S.A.
Samsung 616T modified
160 western digital
XBMC, Avalaunch, UnleashX, MxM
Joined: Mar 12, 2005 Posts: 1887 Location: Orlando/West Palm Beach, FL USA
Posted: Sat Jul 23, 2005 11:11 pm Post subject:
No, You would probably fry something again. You would need the RF shield off a 1.6 b/c there are extra grounding tabs. you can do that yourself.
But I guess with some modification anything is possible. _________________ XBOX v1.6
X3|.3294|XBMC
dprules Xbox-HQ Elite Member Xbox Version: v1.0 Modded: xenium ice + U.S.A.
Joined: Jun 16, 2005 Posts: 226 Location: porterville california
Posted: Mon Jul 25, 2005 2:45 am Post subject:
so your sayin it could go in my v1.0 and removing that r/f shield would allow it to? please tell me because i really want a new mobo for my xbox ecspeccially if it comes with a chip professionally installed by modgod. _________________ xbox v1.0
Xenium ICE + U.S.A.
Samsung 616T modified
160 western digital
XBMC, Avalaunch, UnleashX, MxM
Joined: Mar 12, 2005 Posts: 1887 Location: Orlando/West Palm Beach, FL USA
Posted: Mon Jul 25, 2005 5:42 am Post subject:
shortacid wrote:
No, You would probably fry something again. You would need the RF shield off a 1.6 b/c there are extra grounding tabs. you can do that yourself.
But I guess with some modification anything is possible.
Reread that....look for bold _________________ XBOX v1.6
X3|.3294|XBMC
|
All times are GMT |Page 1 of 1
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You cannot download files in this forum
HQ Network: 22,293 | 
Guests: 9604 | 
Members: 1 
Forums 
