Mabe someone else will know where it is.. _________________
robbieboy Xbox-HQ Freak
Joined: May 15, 2006 Posts: 911
Posted: Sun Jan 07, 2007 10:30 pm Post subject:
Slow down first you will need to make the disk.... (XboxHDM Disk)!!!! _________________
robbieboy Xbox-HQ Freak
Joined: May 15, 2006 Posts: 911
Posted: Sun Jan 07, 2007 10:34 pm Post subject:
Download this and rename it C and put it in the linux folder for XBHDM
download and make the disk first. _________________
Protoman420 Xbox-HQ Enthusiast
Joined: Jan 07, 2007 Posts: 22
Posted: Sun Jan 07, 2007 10:55 pm Post subject:
ok i d/l it and now do i copy MS-c folder to c floder or do i copy everythiing in the Ms-c folder to the c foldder?
Protoman420 Xbox-HQ Enthusiast
Joined: Jan 07, 2007 Posts: 22
Posted: Sun Jan 07, 2007 11:03 pm Post subject:
ok so i jus remane the MS-C folder to C and then run the 'make iso win' and it should produce a iso file im a do it and let u know wat happens
im sorry if i seem like a pain
but thank you for ur support i really apperciate it
Protoman420 Xbox-HQ Enthusiast
Joined: Jan 07, 2007 Posts: 22
Posted: Sun Jan 07, 2007 11:25 pm Post subject:
ok i burnt the cd usin DVDDECRYPTOR
now i pretty much took the xbox apart ealier the ssmsung drive has been completly removed all i have to play wit now is a wide grey cable its flat and skin and about 2inch wide and it has a red line on the one side im assmin that is the ide cable and there also a a yellow hook up that oes rite to the motherboard of the xbox do i need to use that for anything?
now for my comp i have to remove hardrives?
is that waht i have to do and how would i go about doin that??
robbieboy Xbox-HQ Freak
Joined: May 15, 2006 Posts: 911
Posted: Mon Jan 08, 2007 12:00 am Post subject:
You dont need to take them out just un plug them..
And unplug the dvd in xbox..
make shure that the xbox is close to be able to plug the IDE cable from the comp when you need to.. _________________
Protoman420 Xbox-HQ Enthusiast
Joined: Jan 07, 2007 Posts: 22
Posted: Mon Jan 08, 2007 12:26 am Post subject:
ok so then i shut my comp off and then start it up i press pause/break key and then i turn on the xbox now do i disconnect the dvdrom and crd o my comp and connect my xbox to where there were connect after i hit space bar?
Protoman420 Xbox-HQ Enthusiast
Joined: Jan 07, 2007 Posts: 22
Posted: Mon Jan 08, 2007 12:37 am Post subject:
how do i go about unplugin my harddrive and my dvdrom and my cdrom? maybe im unpluggin the wrong things?
robbieboy Xbox-HQ Freak
Joined: May 15, 2006 Posts: 911
Posted: Mon Jan 08, 2007 12:57 am Post subject:
Hold on
Just unplug hdd's from comp
and the dvd drive from xbox
when you have your comp with the cd in it on and paused
turn on the xbox and you will get an error #11 unplug the xbox hdd IDE cable and plug the ide cable from the comp in to the xbox then press spacebar...
Keep reading the TUTT steps slowly so to uderstand them well.......... _________________
Protoman420 Xbox-HQ Enthusiast
Joined: Jan 07, 2007 Posts: 22
Posted: Mon Jan 08, 2007 1:16 am Post subject:
ok theres a ide cable going from my cdrom drive to my dvdrom drive to my motherboard my comps hard drive it connected to my motherboard threw a red cable
wat i did be4 was i shut off the pc start it bac up and pause it i disconnect the ide that was plugd into my motherboard and connected that to my xbox hard drive and then it gave a message sayin inproper boot please select proper boot device and press any key ( something along does lines )
and wen i turn on the xbox it has a number 12 in the corner not a number 11
there is no thick grey cable comin out of my hard drive only i tiny lil red cable
Wat should i do?
robbieboy Xbox-HQ Freak
Joined: May 15, 2006 Posts: 911
Posted: Mon Jan 08, 2007 1:35 am Post subject:
take out just the power to your hdd in the comp. Cos it an sata HDD This way there will no chance of you wiping it
unplug the dvd roms IDE then use that to plug in to your xbox.
so the IDE cable comes from mother bord to cd-rom to xbox HDD when ready..
as for the xbox error 11 or 12 is ok
But you must turn on the xbox b4 taking out the IDE cable from HDD so it can unlock it..
7. Turn on the PC, Before the PC BIOS looks for hard drives, hit the Pause/Break key. It should pause at this time.
8. Turn on the Xbox .
9. It will boot to an error code(nr 11) regarding the dvd-rom, but the hdd will be unlocked, this way you'll get xboxhdm to access it on first attempt Now remove ide from hd and swap it to the pc
10. Hit space bar to continue booting the PC. If it takes a long time to boot (several minutes), then the HD has not been unlocked. _________________
Protoman420 Xbox-HQ Enthusiast
Joined: Jan 07, 2007 Posts: 22
Posted: Mon Jan 08, 2007 2:16 am Post subject:
i did wat u sed and nothing it jus telle me improper boot device did i maybe burn the cd the wrong way?
Inside the c folder is there suppose to be a folder sayin MS-C
or is it jus suppose to contain the dash the font and ausio floders
ok so my cdrom is the slave and my dvdrom is the master does that matter ?
robbieboy Xbox-HQ Freak
Joined: May 15, 2006 Posts: 911
Posted: Mon Jan 08, 2007 2:19 am Post subject:
NO just the files in that file....
And no that's right if your using the cd-rom _________________
robbieboy Xbox-HQ Freak
Joined: May 15, 2006 Posts: 911
Posted: Mon Jan 08, 2007 2:23 am Post subject:
Dose your Bios say the your 1st boot device is you cd-rom...
sounds like it's looking somewere else _________________
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum