Posted: Fri Nov 18, 2005 4:45 am Post subject: AID 2.11 Final - Wont boot...
I need some help with AID 2.11 Final not booting.
Ive burned the .ISO with DVD Decrypter and at slowest speeds possible.
I've used a DVD-R, and a CD-RW, which both wont boot in the XBOX.
The screen keeps coming up to saying Error, and a Code in the Top Left screen shows 16. [Error code 16].
I don't know what to do, any advice would be great.
yoshie1 V.I.P. Lifetime Xbox Version: Xbox V1.6 Modded: Xenium ICE White
Joined: Dec 26, 2004 Posts: 958 Location: Akron, Ohio
Posted: Fri Nov 18, 2005 4:47 am Post subject:
Is your chip flashed with a bios? _________________ Xbox V1.6
Xenium ICE White
EvoX M8+ 16 137+
EvoX 3935
Maxtor 300GB
vsashav Xbox-HQ Enthusiast Xbox Version: Xbox V1.6 Modded: Xenium ICE White
Joined: Nov 16, 2005 Posts: 30
Posted: Fri Nov 18, 2005 4:56 am Post subject:
yoshie1 wrote:
Is your chip flashed with a bios?
The Xbox was modified about a year ago. It's got that default 8gig Hdd.
Everything works fine with the old HDD. But ive got a 120gig that I want to put in instead.
I am unsure what the BIOS version is. All it says old the old 8gig hdd when i boot is Xecuter2. No bios ver. etc... Dashboard that it's running on old hdd is Evolution X.
I just took out the old 8gig HDD, and put in the new 120gig.
Put in the AID CD, DVD that i've made but it doesn't boot.
Have I missed something?
EDIT: I don't know if this could be a problem or not... This is what DVD Decrypter says about my DVD-R.
Supported Write Speeds: 4x, 8x
I put the write speed on 2x but I don't think it has written at that speed, it must of put it up to 4x write speed.
Any Ideas?
vsashav Xbox-HQ Enthusiast Xbox Version: Xbox V1.6 Modded: Xenium ICE White
Joined: Nov 16, 2005 Posts: 30
Posted: Fri Nov 18, 2005 5:46 am Post subject:
... Also the Eject button is blinking RED/Green...
I will now try a CD-R and burn it at 1X.
Will post results shortly.
vsashav Xbox-HQ Enthusiast Xbox Version: Xbox V1.6 Modded: Xenium ICE White
Joined: Nov 16, 2005 Posts: 30
Posted: Fri Nov 18, 2005 6:12 am Post subject:
Is it possible to decrease the size of the AID2.11 ISO???
I tried using that strip tool that comes with the AID 2.11 and followed the instructions but instead of creating that new .iso file it did nuthing in th end...
Any suggestions?
Currently I am stuck.
EDIT: Found a software called C-Xbox Tool for the task.
I still am not sure why the CD/DVD's wont BOOT. My guess is that my slowest BURN / WRITE Speed's are 4X [Lowest] to 8X, and 16X.
EDIT: I have edited the ISO, and deleted a few emulators just so it can fit on a 650MB CD-R.
Will try and burn that at lowest speeds hopefully this will burn at 1X.
EDIT: It's not working I set to speeds of 1X or 2X, but it goes max speed eg 8X or 10X...
Can I force the DVD to burn at slower speeds? Does the ISO really have to be written at slow speeds such as 2X? Slowest that I can write is 4X. Max speed is 16X.
EDIT: The XBOX DVD drive is a Samsung Rev.1 It should read the CD-RW... Only problem is i can write @ 10X [nuthing slower].
Suggestions???
|
All times are GMT |Page 1 of 1
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum
HQ Network: 38,853 | 
Guests: 27605 | 
Members: 0 
Forums 
I set to speeds of 1X or 2X, but it goes max speed eg 8X or 10X...
