Posted: Thu Jan 22, 2009 5:32 pm Post subject: Problem with Xecuter 3 (without LPC rebuild) on Xbox 1.6
Hello,
I soldered the (LPC , HDD, LAN LED, D0) ,the 4 LPC output wires, as well as the alternate 5v on my xbox 1.6
After installing the mod when i do the "quick press power" the X on the external switch is RED, and the xbox boots into the default xbox menu. The "long press power" results in the same( RED X and default xbox menu)
When i do the "Power and Eject" the X turns purple, and the xbox boots into the Flashbios ver 3.x
I got the mod from someone who tried flashing the 1st MB (ON,ON, OFF , OFF) on his ver 1.5 xbox, but used the wrong bios, and coudn't get the mod to work.
So now i am not sure if the problem is with the soldering or that the First 1MB portion of the mod is corrupted. Have looked at all the soldering joints, and all look good to me, but again i am not the best in soldering.
Am not sure what to check next. Any help is appreciated. Have tried searching but coud'nt find anything similar to what i am getting
Thanx
dartht33bagger Moderator
Joined: Apr 17, 2007 Posts: 5408 Location: Oregon, USA
Posted: Fri Jan 23, 2009 12:38 am Post subject:
What I would try first is this. Set the banks like this: on, on, off, off, and flash protect off. Start the xbox up with the eject and the power so your in the flash bios. Get the X3 3924 V1.6 bios from xbins and reflash that bank using telenet. _________________
|
All times are GMT |Page 1 of 1
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum