Joined: Apr 10, 2005 Posts: 252 Location: Sydney, Australia
Posted: Sat Jul 02, 2005 5:49 am Post subject: SID 3.0 won't hide softmod menu!
i wanted to remove the softmod menu from from xbox so i installed SID 3.0 and selected the option to install the softmod the xbox without the disc open tray menu, but it still open the mnu wen i leave the tray open. i've reformatted my xbox b4 cause i had an error and softmodded the xbox again without the disc open menu, but it still comes up wen i leave the tray open. can't figure it out, where would i change a setting somewhere or edit a file to stop this?
also if there is a way to fix this would it be possible to do with without using ftp cause i was gonna softmod my friends xbox and they don't have access to do a ftp.
Thanks very much if someone can help me with this
Cheers
Ausdude
DJB Administrator
Joined: May 23, 2003 Posts: 4031 Location: NSW, Australia
Posted: Sat Jul 02, 2005 8:48 am Post subject: Re: SID 3.0 won't hide softmod menu!
AusDude wrote:
i wanted to remove the softmod menu from from xbox so i installed SID 3.0 and selected the option to install the softmod the xbox without the disc open tray menu, but it still open the mnu wen i leave the tray open. i've reformatted my xbox b4 cause i had an error and softmodded the xbox again without the disc open menu, but it still comes up wen i leave the tray open. can't figure it out, where would i change a setting somewhere or edit a file to stop this?
also if there is a way to fix this would it be possible to do with without using ftp cause i was gonna softmod my friends xbox and they don't have access to do a ftp.
Thanks very much if someone can help me with this
Cheers
Ausdude
Have you updated the AID package to 2.02 ?
AusDude Xbox-HQ Elite Member
Joined: Apr 10, 2005 Posts: 252 Location: Sydney, Australia
Posted: Sat Jul 02, 2005 10:32 am Post subject: Re: SID 3.0 won't hide softmod menu!
DJB wrote:
Have you updated the AID package to 2.02 ?
ahh... no i haven't, so that will fix it if i do will it?
SoftxBox Xbox-HQ User Xbox Version: 1.6 Modded: Softmod Installer Deluxe
Joined: Jun 10, 2005 Posts: 15
Posted: Sat Jul 02, 2005 10:03 pm Post subject: Re: SID 3.0 won't hide softmod menu!
DJB wrote:
AusDude wrote:
i wanted to remove the softmod menu from from xbox so i installed SID 3.0 and selected the option to install the softmod the xbox without the disc open tray menu, but it still open the mnu wen i leave the tray open. i've reformatted my xbox b4 cause i had an error and softmodded the xbox again without the disc open menu, but it still comes up wen i leave the tray open. can't figure it out, where would i change a setting somewhere or edit a file to stop this?
also if there is a way to fix this would it be possible to do with without using ftp cause i was gonna softmod my friends xbox and they don't have access to do a ftp.
Thanks very much if someone can help me with this
Cheers
Ausdude
Have you updated the AID package to 2.02 ?
Can you tell me what addon pack I have to update to make a AID DVd? add a dummy file 1GB, English patch, and the 2.02 patch ?
DJB Administrator
Joined: May 23, 2003 Posts: 4031 Location: NSW, Australia
Posted: Sat Jul 02, 2005 10:18 pm Post subject: Re: SID 3.0 won't hide softmod menu!
SoftxBox wrote:
DJB wrote:
AusDude wrote:
i wanted to remove the softmod menu from from xbox so i installed SID 3.0 and selected the option to install the softmod the xbox without the disc open tray menu, but it still open the mnu wen i leave the tray open. i've reformatted my xbox b4 cause i had an error and softmodded the xbox again without the disc open menu, but it still comes up wen i leave the tray open. can't figure it out, where would i change a setting somewhere or edit a file to stop this?
also if there is a way to fix this would it be possible to do with without using ftp cause i was gonna softmod my friends xbox and they don't have access to do a ftp.
Thanks very much if someone can help me with this
Cheers
Ausdude
Have you updated the AID package to 2.02 ?
Can you tell me what addon pack I have to update to make a AID DVd? add a dummy file 1GB, English patch, and the 2.02 patch ?
the 1 gig dummy file is ok if you don't want to fill your DVD up with too many rams. The English DHCP patch is only needed if you want to use the DHCP Network, and the 2.02 update patch is needed to fix some softmod issues.
Hope that helps....
SoftxBox Xbox-HQ User Xbox Version: 1.6 Modded: Softmod Installer Deluxe
Joined: Jun 10, 2005 Posts: 15
Posted: Sat Jul 02, 2005 10:41 pm Post subject: Re: SID 3.0 won't hide softmod menu!
DJB wrote:
SoftxBox wrote:
DJB wrote:
AusDude wrote:
i wanted to remove the softmod menu from from xbox so i installed SID 3.0 and selected the option to install the softmod the xbox without the disc open tray menu, but it still open the mnu wen i leave the tray open. i've reformatted my xbox b4 cause i had an error and softmodded the xbox again without the disc open menu, but it still comes up wen i leave the tray open. can't figure it out, where would i change a setting somewhere or edit a file to stop this?
also if there is a way to fix this would it be possible to do with without using ftp cause i was gonna softmod my friends xbox and they don't have access to do a ftp.
Thanks very much if someone can help me with this
Cheers
Ausdude
Have you updated the AID package to 2.02 ?
Can you tell me what addon pack I have to update to make a AID DVd? add a dummy file 1GB, English patch, and the 2.02 patch ?
the 1 gig dummy file is ok if you don't want to fill your DVD up with too many rams. The English DHCP patch is only needed if you want to use the DHCP Network, and the 2.02 update patch is needed to fix some softmod issues.
Hope that helps....
Thank you. I have question. I have to burn the AID 2.0 into a DVD-R, then install softmod from those games. Then, insert the AID DVD to set up the other soft eares ?
AusDude Xbox-HQ Elite Member
Joined: Apr 10, 2005 Posts: 252 Location: Sydney, Australia
Posted: Sat Jul 02, 2005 10:54 pm Post subject:
i updated my AID to 2.02, but it still does that, but i think its becuase wen ive been putting the softmod on ive been selecting PBL Metto + ms dash instead. so i tried the nkpather + ms dash and it comes up with an error half way through the installation which says "Error - Batch Rename", do you know wat this is?
Cheers
Ausdude
DJB Administrator
Joined: May 23, 2003 Posts: 4031 Location: NSW, Australia
Posted: Sun Jul 03, 2005 12:14 am Post subject: Re: SID 3.0 won't hide softmod menu!
AusDude wrote:
DJB wrote:
Have you updated the AID package to 2.02 ?
ahh... no i haven't, so that will fix it if i do will it?
Hopefully it should, because there was some problems with the softmod installation in 2.0.
DJB Administrator
Joined: May 23, 2003 Posts: 4031 Location: NSW, Australia
Posted: Sun Jul 03, 2005 12:35 am Post subject:
AusDude wrote:
i updated my AID to 2.02, but it still does that, but i think its becuase wen ive been putting the softmod on ive been selecting PBL Metto + ms dash instead. so i tried the nkpather + ms dash and it comes up with an error half way through the installation which says "Error - Batch Rename", do you know wat this is?
Did you apply the 2.02 update correctly, and did the DVD burn properly?
I just checked the files and my config for AID 2 and it's all fine from what I can see.
kilroytheguumba Xbox-HQ Member Xbox Version: 1.0 Modded: 007.AUF now, X3 HW soon
Joined: Jan 01, 2005 Posts: 77
Posted: Sun Jul 03, 2005 2:31 am Post subject:
AusDude wrote:
i updated my AID to 2.02, but it still does that, but i think its becuase wen ive been putting the softmod on ive been selecting PBL Metto + ms dash instead. so i tried the nkpather + ms dash and it comes up with an error half way through the installation which says "Error - Batch Rename", do you know wat this is?
Cheers
Ausdude
After I installed my softmodded 80GB, I used the AID2 2.02 DVD-R that I made to Format C. install PBL+MSDash, then installed UnleashX without eject button, and it worked fine for me. Both buttons power the system and take me straight to UnleashX, and ltools doesn't even come up unless I tell it to from the Apps menu.
As for the error, I didn't encounter any when I went to install. I'd have to concur with re-patching your AID2 ISO, and reburning the disc.
forahobby Administrator
Joined: May 22, 2003 Posts: 23945 Location: NSW, Australia
Posted: Sun Jul 03, 2005 4:05 am Post subject:
Ive done my own first 2 softmods just recently and they all worked flawlessly using the AID2/SID system..
Joined: May 14, 2004 Posts: 323 Location: Nasti Nati
Posted: Sun Jul 03, 2005 4:09 am Post subject:
i softmodded a few boxes last week using the sid v3.0 and aid v2.0x and i gota say it is the BEST WAY to softmod and install dashboards, apps, emulators,ect.
gota love unsigned code...
AusDude Xbox-HQ Elite Member
Joined: Apr 10, 2005 Posts: 252 Location: Sydney, Australia
Posted: Sun Jul 03, 2005 5:17 am Post subject:
tried it again, still didn't work, so i just used SID to install the softmod without the cd tray open menu and that worked fine
SoftxBox Xbox-HQ User Xbox Version: 1.6 Modded: Softmod Installer Deluxe
Joined: Jun 10, 2005 Posts: 15
Posted: Sun Jul 03, 2005 6:25 am Post subject:
AusDude wrote:
i updated my AID to 2.02, but it still does that, but i think its becuase wen ive been putting the softmod on ive been selecting PBL Metto + ms dash instead. so i tried the nkpather + ms dash and it comes up with an error half way through the installation which says "Error - Batch Rename", do you know wat this is?
Cheers
Ausdude
Oh ! I have the same problem. It made me crazy for a long time, but then I find out: WE see this message because we do not need this option. you CHoose the Install Dasboard option, not the one you chose because you are already install the software from the SID 3.0 when you load the game save . Then select install applications, install ALL. NOW tuen off. Then turn on with the DVD tray emty and close....... Enjoy.
AusDude Xbox-HQ Elite Member
Joined: Apr 10, 2005 Posts: 252 Location: Sydney, Australia
Posted: Sun Jul 03, 2005 11:52 am Post subject:
SoftxBox wrote:
Oh ! I have the same problem. It made me crazy for a long time, but then I find out: WE see this message because we do not need this option. you CHoose the Install Dasboard option, not the one you chose because you are already install the software from the SID 3.0 when you load the game save . Then select install applications, install ALL. NOW tuen off. Then turn on with the DVD tray emty and close....... Enjoy.
ok i'm not quite sure wat you mean, do u mean that to install the dashboard you go to install dashboard in the main menu of AID instead of isntalling the dashboard from the softmod section? is that wat you mean?
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum
HQ Network: 10,794 | 
Guests: 3890 | 
Members: 1 
Forums 
