dprules Xbox-HQ Elite Member Xbox Version: v1.0 Modded: xenium ice + U.S.A.
Joined: Jun 16, 2005 Posts: 226 Location: porterville california
Posted: Mon Jun 20, 2005 9:13 am Post subject: dead or alive xtreme beachvolleyball
ok im having a issue with this game now i rented it from blockbuster as soon as i got it home i ripped it to my computer made it a .xiso file and burned it and it will not boot it takes me straight back to the evox menu so my question is: is there a way to play a copied version and if so what do i need to do it!!! _________________ xbox v1.0
Xenium ICE + U.S.A.
Samsung 616T modified
160 western digital
XBMC, Avalaunch, UnleashX, MxM
Shark2th Moderator
Joined: Nov 17, 2004 Posts: 5222 Location: Tennessee, USA
Posted: Mon Jun 20, 2005 6:34 pm Post subject:
If you just took it off the disk and ripped it to your pc, it most likely wouldn't work since the Xbox is written in it's own language. It's not a standard DVD. You won't have any luck trying to play a game that has not passed through the Xbox first. No DVD software can copy the Xbox games without a passthrough.
The only way I see this situation working is to use DVD2XBOX on the original then ftp to the pc, then burn it.
I know it's been said before but has to be said again just to be sure that this is not taken out of context. Copying rented games is illegal. _________________ http://twitter.com/HQ_Shark2th
dprules Xbox-HQ Elite Member Xbox Version: v1.0 Modded: xenium ice + U.S.A.
Joined: Jun 16, 2005 Posts: 226 Location: porterville california
Posted: Mon Jun 20, 2005 10:00 pm Post subject:
ok what i did was FTP it to my comp through my xbox but it wouldnt work _________________ xbox v1.0
Xenium ICE + U.S.A.
Samsung 616T modified
160 western digital
XBMC, Avalaunch, UnleashX, MxM
Shark2th Moderator
Joined: Nov 17, 2004 Posts: 5222 Location: Tennessee, USA
Posted: Tue Jun 21, 2005 3:01 pm Post subject:
Ah... my bad.
perhaps it's the media, it depends upon the version of the Xbox but my V1.0 hates certain media. It's all about the reader in my case. I have to test from time to time to see what media is working best. What program did you use to burn the iso? _________________ http://twitter.com/HQ_Shark2th
dprules Xbox-HQ Elite Member Xbox Version: v1.0 Modded: xenium ice + U.S.A.
Joined: Jun 16, 2005 Posts: 226 Location: porterville california
Posted: Tue Jun 21, 2005 5:00 pm Post subject:
i used dvd decrypter of course and your drive i found some tutorials to make your ddvd read any media and now that i tweked with mine it does read cd-r cds with a stock phillips dvd drive that has been in there for over 4 years now i will post that tutorial soon to help you guys out on this later se peace _________________ xbox v1.0
Xenium ICE + U.S.A.
Samsung 616T modified
160 western digital
XBMC, Avalaunch, UnleashX, MxM
Shark2th Moderator
Joined: Nov 17, 2004 Posts: 5222 Location: Tennessee, USA
Posted: Tue Jun 21, 2005 8:07 pm Post subject:
dprules wrote:
i found some tutorials to make your ddvd read any media
A tutorial to make the DVD read any media.... I'm confused. Like tricking an old V1.0 dvd unit to accept any type? I'd like to read that. I'd think if there was a way to make the original DVD unit less finicky, it would have been posted a lot. I await anxiously your findings dprules. _________________ http://twitter.com/HQ_Shark2th
dprules Xbox-HQ Elite Member Xbox Version: v1.0 Modded: xenium ice + U.S.A.
Joined: Jun 16, 2005 Posts: 226 Location: porterville california
Posted: Tue Jun 21, 2005 8:15 pm Post subject:
i am gonna post the drive tweaking for the phillips and thompson drive _________________ xbox v1.0
Xenium ICE + U.S.A.
Samsung 616T modified
160 western digital
XBMC, Avalaunch, UnleashX, MxM
Joined: Mar 12, 2005 Posts: 1887 Location: Orlando/West Palm Beach, FL USA
Posted: Tue Jun 21, 2005 8:31 pm Post subject:
Its easy, you have to open up the cd rom and go to the laser pcb. THere is hard red resin covering the potentiometer (pot). Scrape that, then get an ohm reading off of it. It starts between 1200-1500 about, and should go no lower than 850 ohms about. If you do it will ruin the media. It increases the power going to the laser.
It helps, but the thompson has a piss poor mirror and laser setup. _________________ XBOX v1.6
X3|.3294|XBMC
dprules Xbox-HQ Elite Member Xbox Version: v1.0 Modded: xenium ice + U.S.A.
Joined: Jun 16, 2005 Posts: 226 Location: porterville california
Posted: Tue Jun 21, 2005 8:35 pm Post subject:
yo man i cannot find that resin please post a picture i have been looking 4 1 but cant find 1 and where can you find the ohm meter i cant find that either thanx _________________ xbox v1.0
Xenium ICE + U.S.A.
Samsung 616T modified
160 western digital
XBMC, Avalaunch, UnleashX, MxM
Shark2th Moderator
Joined: Nov 17, 2004 Posts: 5222 Location: Tennessee, USA
dprules Xbox-HQ Elite Member Xbox Version: v1.0 Modded: xenium ice + U.S.A.
Joined: Jun 16, 2005 Posts: 226 Location: porterville california
Posted: Tue Jun 21, 2005 9:01 pm Post subject:
do you know how much 1 of them costs because i only have 137 dollars going tords myxbox already and from what i have seen with the phillips drive 500 ohms will read anything i mean anything!!! _________________ xbox v1.0
Xenium ICE + U.S.A.
Samsung 616T modified
160 western digital
XBMC, Avalaunch, UnleashX, MxM
Shark2th Moderator
Joined: Nov 17, 2004 Posts: 5222 Location: Tennessee, USA
Posted: Tue Jun 21, 2005 9:21 pm Post subject:
Either www.radioshack.com or try www.ebay.com and see what kind of deals might be out there. Otherwise, I have no idea on pricing anymore. Been too long. Radio Shack if you want it today, Ebay if you can wait for shipping.
The resin pictures? That's on shortacid. _________________ http://twitter.com/HQ_Shark2th
dprules Xbox-HQ Elite Member Xbox Version: v1.0 Modded: xenium ice + U.S.A.
Joined: Jun 16, 2005 Posts: 226 Location: porterville california
Posted: Wed Jun 22, 2005 4:52 am Post subject:
while wy are on the this subject i am looking for 2 wireless network cards and a wirless router note: they have to be cheap and reliable i dont want to copy a game to my harddrive and it be halfassand it has to at least transfer at 20MBPS _________________ xbox v1.0
Xenium ICE + U.S.A.
Samsung 616T modified
160 western digital
XBMC, Avalaunch, UnleashX, MxM
Shark2th Moderator
Joined: Nov 17, 2004 Posts: 5222 Location: Tennessee, USA
Posted: Wed Jun 22, 2005 12:57 pm Post subject:
Ah the wireless network selection. Man that's a matter of taste. There is a bunch of new ones out that I haven't looked at. I've run mine for around 4 years now and added the Xbox to it around 7 or 8 months ago. I find it rather reliable but like all wireless solutions (shamelessly stolen catch phrase) they have strengths and weaknesses. Check out the new "G"'s and see if they would work for ya. _________________ http://twitter.com/HQ_Shark2th
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum
HQ Network: 24,431 | 
Guests: 10769 | 
Members: 1 
Forums 
