Joined: Aug 28, 2004 Posts: 796 Location: Wales, UK
Posted: Sun Dec 12, 2004 12:08 am Post subject: Solution: Xbox v1.6 LPC rebuild
If your xbox is a version 1.6 (excalibur video encode located at the back of the board) then you have no option but to do a rebuild.
Ok you have 2 options here you can either use an lpc rebuild board, these come with the smartxx chips and xecuter chips. You can also buy them seperatley (www.custom-xmodz.co.uk). If however you are impatient like me and just want to install your chip then you can do a wired rebuild.
First of all lets go through the rebuild board, take a look at the picture below named "rebuild board". it is soldered to the bottom of the motherboard as in the picture (arrows show where to solder), the D0 wire from the chip is then soldered to the d0 pad on the rebuild board ( one end on board, the other on the chip). Wire the other points of the chip as you normally would according to your chips install diagrams and your away.
For the wired install it's pretty similar, just solder wires (I reccomend 30awg wire) as shown on the picture below. Where there is a yellow line, that is meant to be a wire, the LFRAME (d0) should be soldered to the point on the board as shown, and the other end to the D0 point on the chip, then install your chip as usual.
If your motherboard has Hynix memmory chips (2 on top, 2 on bottom) then you have a 1.6B, the soldering is all the same, but you will need the M8+ bios, and not the normal M8, unless you have an xecuter 3.
All 1.6's require either the M8 or the M8+ bios at this time (except xecuter 3)
Hope this helps
DJH
rebuildpcb_align2.jpg
Description:
Rebuild Board
Filesize:
109.68 KB
Viewed:
680 Time(s)
lpc_rebuild_pin.jpg
Description:
Wired rebuild
Filesize:
90.84 KB
Viewed:
1102 Time(s)
|
All times are GMT |Page 1 of 1
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum
HQ Network: 31,497 | 
Guests: 25110 | 
Members: 0 
Forums 
