Joined: Jul 13, 2003 Posts: 7 Location: Small place in Oz (Perth)
Posted: Mon May 04, 2009 2:43 pm Post subject: Noob question - AID 4.5 in old modchip?
Hi, I have Ozmodchip installed few years ago with switch to turn off. Never been update the bios since then. Can the modchip support the new AID 4.5?
Thanks
wes213 Administrator
Joined: Feb 04, 2007 Posts: 10518 Location: Harrisonburg V.A.
Posted: Mon May 04, 2009 5:37 pm Post subject:
It can run the new AID, it will not effect the chip BIOS unless you tell it to.
edgar28 Xbox-HQ Newbie Xbox Version: V1.1 Modded:
Joined: Jul 13, 2003 Posts: 7 Location: Small place in Oz (Perth)
Posted: Tue May 05, 2009 1:16 pm Post subject:
wes213 wrote:
It can run the new AID, it will not effect the chip BIOS unless you tell it to.
Thanks, intended to install the new evox 1st (is there any? or should use newer program to play backups? which one is better?), maybe media center and emulator on it later.
wes213 Administrator
Joined: Feb 04, 2007 Posts: 10518 Location: Harrisonburg V.A.
Posted: Wed May 06, 2009 2:28 am Post subject:
I feel there is no better then XBMC but if you like it real simple and want the job taken care of with no bells or whistles then Evox is good but it has not been updated in years.
edgar28 Xbox-HQ Newbie Xbox Version: V1.1 Modded:
Joined: Jul 13, 2003 Posts: 7 Location: Small place in Oz (Perth)
Posted: Wed May 06, 2009 11:27 am Post subject:
Thank you very much.
forahobby Administrator
Joined: May 22, 2003 Posts: 23945 Location: NSW, Australia
Posted: Wed May 06, 2009 2:14 pm Post subject:
edgar28 wrote:
Thank you very much.
Hi edgar,
Only first gen modchips may require you to change one of the filenames in order to boot, but i doubt you have one of those chips installed.
Joined: Jul 13, 2003 Posts: 7 Location: Small place in Oz (Perth)
Posted: Thu May 07, 2009 11:15 am Post subject:
thanks for the tip. I bought the modchip as it stated was design locally (Oz) and review was not bad as well.
edgar28 Xbox-HQ Newbie Xbox Version: V1.1 Modded:
Joined: Jul 13, 2003 Posts: 7 Location: Small place in Oz (Perth)
Posted: Fri May 08, 2009 2:08 pm Post subject:
tested the AID4.5. Found out that my chip is only 256k
can't get the latest x2 install
when i try to upgrade to latest Evox, it seems it still running the old Evox. When i try to install XBMC, it install, but still running at old Evox.......
how to use the trainer?
can i use the one click installation? my modchip was installed with switch, so it doesn't affect the C drive?
Thanks in advance
wes213 Administrator
Joined: Feb 04, 2007 Posts: 10518 Location: Harrisonburg V.A.
Posted: Fri May 08, 2009 3:05 pm Post subject:
Yeah man you can use the one click install and to use the trainers just go to your games list in XBMC and hit the white button and update trainers (must be on line) and when its got them you will see a yellow symbol on the game icons that have trainers.
just hit the white button with the game highlighted to get to the trainer list for that game.
edgar28 Xbox-HQ Newbie Xbox Version: V1.1 Modded:
Joined: Jul 13, 2003 Posts: 7 Location: Small place in Oz (Perth)
Posted: Sat May 09, 2009 10:10 am Post subject:
Thanks again wes, i thought the AID4.5 comes with quite a big library of trainers already. so far i'm able to install Unleash and XBMC only. But unleash doesn't have trainer function?
Evox still refuse to install in my xbox, after install and reboot, it always reboot after bios boot. (read up some old thread stated cause by some trainer....... this is tricky)
I've updated my bios from 4977 to 4983 (can't go higher than that because of my 256k chip) - i realised that my soul calibur 2 doesn't load anymore, is it because lack of eject fix in 4983? but my mortal kombat able to load now, as previously can't.
wes213 Administrator
Joined: Feb 04, 2007 Posts: 10518 Location: Harrisonburg V.A.
Posted: Sat May 09, 2009 2:06 pm Post subject:
Quote:
i thought the AID4.5 comes with quite a big library of trainers already
The point of updating the trainers in XBMC is so it will link the game to the corresponding trainer.
If you really want EVOX then install it and reboot to AID, then use the AID file manager to remove the trainers.
Once you can boot evox run XBMC as an app and use it to update the trainers list.
edgar28 Xbox-HQ Newbie Xbox Version: V1.1 Modded:
Joined: Jul 13, 2003 Posts: 7 Location: Small place in Oz (Perth)
Posted: Sat May 09, 2009 4:02 pm Post subject:
Thanks Wes213! was trying for the couple of hours. Finally get it done. Should have read ur response 1st. but was busy trying.
Initially wanted Evox because XBMC's trainer doesn't work. Now found out that is the trainer causing problem........
Now i use unleash with application of XBMC and Evox.
Thank you again. Will try on emulator in the near future.
wes213 Administrator
Joined: Feb 04, 2007 Posts: 10518 Location: Harrisonburg V.A.
Posted: Sat May 09, 2009 7:29 pm Post subject:
Good deal man, have fun.
|
All times are GMT |Page 1 of 1
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum
HQ Network: 34,087 | 
Guests: 26487 | 
Members: 1 
Forums 
