But when I start up my xbox evox says my ip for the xbox is 0.0.0.0 ? What did I do wrong?
TheModGod Xbox-Hq Legendary
Joined: Apr 18, 2004 Posts: 5303 Location: Greensburg PA
Posted: Sun Oct 24, 2004 3:50 pm Post subject:
You can manually input your IP address very easil. Just go to your evox settings and when you highlight the IP address press your A button on your controller. Input your correct IP address and then scroll the whole way down to the bottom and highlight "Save and EXIT". Reboot your Xbox and your new IP will take effect. My guess is you are not clicking the Save and Exit, you are just backing out of the settings...it's a common mistake.
realmccloy
-----------------------
http://www.xbox-hq.com http://www.themodgod.com _________________ Good Deals: Death@Hand, funkydopenloven, StaticMind, Slamscaper, PorscheXboxter
Bad Deals: None Yet
Pending Deals: Vanguard
bobrownik V.I.P. Lifetime Xbox Version: 1.0-1.6 Modded: xenium/aladdin/x2.3/DuoX2
Joined: Oct 21, 2004 Posts: 914 Location: PA, USA
Posted: Sun Oct 24, 2004 4:42 pm Post subject: yeahhhh
realmccloy is correct ,
ill just give you a little more detail . when using a crosseover cable between your xbox and the computer you have to go to evox settings and switch it to use static ip address , then assign your own ip address to the xbox for example 192.168.0.64 then go down and save the settings and reboot
then go to tcp/ip settings for that connection on your computer and set it to 192.168.0.100 ,
it will work if you are using the crossover cable but it will not if you are using straight through cable ,
you might have to adjust the ip addresses to suit your machine if you cant get access to the internet with those ips set
|
All times are GMT |Page 1 of 1
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum