Posted: Sat Dec 16, 2006 12:13 am Post subject: X3CE - 1.6 2-boot then frag on enable, works fine disabled.
Ok guys, I'm in need of some help here. I have a version 1.6 and an X3CE installed. I just did the install and I get a boot-off-boot-off-frag when the chip is enabled (quick press) but I can still boot normal with it disabled (long press). I've tried taking the whole sha-bang out and redoing the job thinking maybe I bridged a connection or had solder splash but I dont see anything. Is there something I could be missing? All of my connections look perfect so I have a hard time believing it was anything I did. Is there a dip switch setting I could have wrong? I'm lost here......and getting irritated by it.
Btw, I tried to boot it up 'enabled' with the drives out but still plugged in. The chip lights up inside so I know that it does have power (how much..I have no idea, but it powers up) I also tried the 'backup' bios double-button-push. It doesnt do anything at all, no boot, no action what so ever.
I've checked this thing atleast 5 times now. Gone over it with a fine tooth comb. What could I be missing? Is there something different on the X3CE than the X3 that would've directed me wrong in the tutorial? I checked my 5v Alt source and it is supplying 4.95 volts so that isn't the problem. I unplugged the external switch and tried it that way, still the same deal. I unplug the D0/Hd/Lan plug and the chip fails to do anything (like it is taken off the header).
Also, when I try to turn it on (enabled) the external switch indicator LED shows up as RED instead of BLUE. It shows up as RED also when I long-push (disable).
|
All times are GMT |Page 1 of 1
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum
HQ Network: 31,830 | 
Guests: 26363 | 
Members: 2 
Forums 
