quasiskiddle Xbox-HQ User Xbox Version: v1.0 Modded: xecuter3
Joined: Feb 20, 2005 Posts: 16 Location: WA, USA
Posted: Mon Feb 21, 2005 5:13 am Post subject: Bios Problems
I am a newbie of course. I have a v1.0 xbox. I modded it with an xecuter3. The chip install part was easy. What i can't figure out is how to load the bios and the dashboard and whatever else i have to put on it. If someone could help me out that would be great. I have tried IRC and i have all kinds of files that say bios and all the other junk i am supposed to have. I have followed all the steps i think but for some reason it isn't loading a new bios. if anyone can help my email is skiddles@dr.com...
Loading all this stuff is probably easy but i can't figure it out. i am thinking about giving up.
GTGene Xbox-HQ Member Xbox Version: Xbox V1.0 Modded: Xecuter3
Joined: Nov 11, 2004 Posts: 58 Location: Beach house on the moon
Posted: Mon Feb 21, 2005 1:05 pm Post subject:
Quasiskiddle,
By far the easiest way is to either flash using ftp or http.. http is the easiest. For complete noob instructions go here http://home.comcast.net/~x3guide/ and then click on BIOS Flashing. About halfway down the page you will find instructions for flashing using ftp and http. BTW.. Be sure you are using eithet the X3 1959 or 2914 bios and that you have your switch set to turn protect off. Without that done and without your switch settings correct you will continue to have problems. The link about is a good place to learn everything you need to start enjoying your X3 chip... Let me know if you have any further questions. _________________ GTGene
V1.0 Xbox
Xecuter 3.0 mod chip
1959 bios and 2913(separate banks)
Evox Dash
XBMC
120gb Maxtor HDD
Logitech Wireless Controller
50" Sony LCD HDTV
quasiskiddle Xbox-HQ User Xbox Version: v1.0 Modded: xecuter3
Joined: Feb 20, 2005 Posts: 16 Location: WA, USA
Posted: Mon Feb 21, 2005 10:08 pm Post subject:
Alright, now i have the bios!!! Thanks for all the help.. My next question is there a way to network flash the evox dash on to the new bios. or do you have to do it with a disc? I finally got the bios on it by network flashing and it was actually really easy, i am just wondering if you can do that with the dashboard also. I am using Memorex 4x cd-rw's but they seem to be not working so if there is another way to do the dash, or a different brand of cd that works better, i would like to know. Thanks
TheModGod Xbox-Hq Legendary Xbox Version: v1.0 Modded: xecuter3
Joined: Apr 18, 2004 Posts: 5303 Location: Greensburg PA
Posted: Tue Feb 22, 2005 9:51 pm Post subject:
eek..
Okay, you are now done with the chip. FlashProtect it and DONT do anything more with the chip.
Your dashboard goes to the hard drive. Not the chip. Your chip can only hold a few MB..not a few hundred
Basically, you need to now decide what you are doing with your hard drive. Are you installing a larger one (Highly recommended) or are you going to run with the stock hard drive.
Once you make that decision, now lets get that hard drive configured.
Your best bet. Get an autoinstaller. An autoinstaller will install all of your applications to your hard drive, including your dashboard. It will also prepare your hard drive so that your dash operates correctly and looks to the correct folders for all of your apps, emulators, and games.
Read some basic tutorials.. EvolutionX for dummies is a great starter. It's a little older, and some of the methods won't apply to you, but the basics will.
You can either install evolution X via the installer, or, create an evox cd itself, or create folders and then FTP the evox files into it. This will create need for you to edit your evox.ini file though. Again, I highly recommend using an autoinstaller and reading some tutorials so you have a better understanding on how the chip and files work
TheModGod
------------------------
http://www.themodgod.com http://www.xbox-hq.com _________________ Good Deals: Death@Hand, funkydopenloven, StaticMind, Slamscaper, PorscheXboxter
Bad Deals: None Yet
Pending Deals: Vanguard
GTGene Xbox-HQ Member Xbox Version: Xbox V1.0 Modded: Xecuter3
Joined: Nov 11, 2004 Posts: 58 Location: Beach house on the moon
Posted: Wed Mar 02, 2005 8:04 pm Post subject:
By far the easiest and best is the XBHQ-AID 1.01 autoiinstaller. This has EVERYTHING but the kitchen sink... Good luckl to you! _________________ GTGene
V1.0 Xbox
Xecuter 3.0 mod chip
1959 bios and 2913(separate banks)
Evox Dash
XBMC
120gb Maxtor HDD
Logitech Wireless Controller
50" Sony LCD HDTV
|
All times are GMT |Page 1 of 1
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum
HQ Network: 30,286 | 
Guests: 23282 | 
Members: 1 
Forums 
