Posted: Sun Oct 17, 2021 6:33 am Post subject: error 5 on xbox
Hi everyone recently I got a broken xbox for 20$.It had a error 7, i found out that the hdd was broken and I ordered another one.Then I got error 16 which i succed on bypassing that yesterday when I putted some clean xbox c and e files on the empty hdd(well i thing i bypassed),but the hard drive is unlocked and i don't know how to lock it.I am using the xboxhdm23usb but when i try to lock it,it says:Error - unable to open file eeprom.bin.
Is there anyway I can fix that?
Thanks for everything
ArchAngle V.I.P. Lifetime Xbox Version: v1.6 Modded: Xecuter 2.6 CE
Joined: Oct 03, 2014 Posts: 367
Posted: Sun Oct 17, 2021 12:42 pm Post subject:
Do you have the eeprom.bin?
If not that is the problem.
Solutions:
1). Build/buy and use an eeprom reader.
2). Fit a chip and then the need for a locked HDD is removed.
Pantelos Xbox-HQ Newbie Xbox Version: v1.6 Modded: Xecuter 2.6 CE
Joined: Oct 17, 2021 Posts: 6
Posted: Sun Oct 17, 2021 12:50 pm Post subject:
no I don't have the eeprom.bin.Thanks for everything I'll try your solution but do you know any good tutorial thatsay how to make one ad what do you need?
I tryed to find an eeprom reader in my country but nothing...Also I cheked on ebay and amazon but they are not shiping them here.
kaos_engr V.I.P. Lifetime
Joined: Jun 04, 2012 Posts: 192
Posted: Mon Oct 18, 2021 11:22 pm Post subject:
Pantelos wrote:
no I don't have the eeprom.bin.Thanks for everything I'll try your solution but do you know any good tutorial thatsay how to make one ad what do you need?
I tryed to find an eeprom reader in my country but nothing...Also I cheked on ebay and amazon but they are not shiping them here.
Do you have access to a Raspberry Pi or Arduino?
If so, there are programs for either single board computer that can be used to read the 8-pin serial EEPROM's data to create the eeprom.bin file.
Once you have this 256 byte file, add it to the directory where XboxHDM23USB is located on your PC - xboxhd.bat will be present in the correct folder. When you try to lock the hard drive, the file not found error will no longer occur. The hard drive will be locked with the correct password for the Xbox that you read the data from its configuration EEPROM.
Dkoots Moderator
Joined: Oct 13, 2007 Posts: 1015 Location: VA
Posted: Sun Oct 24, 2021 1:04 am Post subject: Re: error 5 on xbox
Pantelos wrote:
Hi everyone recently I got a broken xbox for 20$.It had a error 7, i found out that the hdd was broken and I ordered another one.Then I got error 16 which i succed on bypassing that yesterday when I putted some clean xbox c and e files on the empty hdd(well i thing i bypassed),but the hard drive is unlocked and i don't know how to lock it.I am using the xboxhdm23usb but when i try to lock it,it says:Error - unable to open file eeprom.bin.
Is there anyway I can fix that?
Thanks for everything
Have you tried reconnecting the original drive and then making sure all the cables were completely plugged in? _________________
Pantelos Xbox-HQ Newbie Xbox Version: 1.0/1.1/1.4/1.6 Modded: X2/X3/XST/Xenium
Joined: Oct 17, 2021 Posts: 6
Posted: Sun Oct 24, 2021 8:11 am Post subject:
yes I have already tried it.the hdd is also making a weird noise
Dkoots Moderator
Joined: Oct 13, 2007 Posts: 1015 Location: VA
Posted: Tue Oct 26, 2021 11:59 am Post subject:
Pantelos wrote:
yes I have already tried it.the hdd is also making a weird noise
Don't give up hope just yet. Still a few things we can try. Making noises is normal for those old things. It may be on its way out.
Assuming you already have the ability to connect your drive to your PC.
Plug up everything like it was when you got the Xbox. This time however, do not plug the power cable into the DVD drive. With everything else plugged in correctly, power on the Xbox and hopefully you should get an error 12 screen. _________________
Pantelos Xbox-HQ Newbie Xbox Version: 1.0/1.1/1.4/1.6 Modded: X2/X3/XST/Xenium
Joined: Oct 17, 2021 Posts: 6
Posted: Thu Oct 28, 2021 3:39 pm Post subject:
so I pluged everything except the disk driver as you suggested
but still getting an error 7 with the old hdd.I was able to get to a store to my neighborhood and get what I need to extract the eeprom for my xbox to my computer.
image0.jpeg
Description:
Filesize:
1.71 MB
Viewed:
541 Time(s)
Dkoots Moderator
Joined: Oct 13, 2007 Posts: 1015 Location: VA
Posted: Thu Oct 28, 2021 8:55 pm Post subject:
Any chance you have another IDE cable you could try on it?
Also check and see what your jumper is set to on the HDD. _________________
Pantelos Xbox-HQ Newbie Xbox Version: 1.0/1.1/1.4/1.6 Modded: X2/X3/XST/Xenium
Joined: Oct 17, 2021 Posts: 6
Posted: Sat Oct 30, 2021 7:49 am Post subject:
I had some free time today so i tryed everything you suggested.Nothing changed still getting the error 7 with the old hdd.I also tryed connecting it to my computer but it didn't even recognize it.I think that the best thing now is to build the cable and extract the eeprom.What do you think?Is there anything else I can try?
Dkoots Moderator
Joined: Oct 13, 2007 Posts: 1015 Location: VA
Posted: Sat Oct 30, 2021 2:11 pm Post subject:
Pantelos wrote:
Is there anything else I can try?
There’s always more you can try, but I’d go ahead to grab the eeprom while you have the time and tools. That will make this process a breeze. _________________
Pantelos Xbox-HQ Newbie Xbox Version: 1.0/1.1/1.4/1.6 Modded: X2/X3/XST/Xenium
Joined: Oct 17, 2021 Posts: 6
Posted: Sat Oct 30, 2021 3:50 pm Post subject:
Ok thanks for everything.Have a nice continuation to your day!
Dkoots Moderator
Joined: Oct 13, 2007 Posts: 1015 Location: VA
Posted: Sat Oct 30, 2021 5:51 pm Post subject:
Pantelos wrote:
Ok thanks for everything.Have a nice continuation to your day!
Anytime and likewise. Whenever you’ve got the eeprom.bin on your PC, let me know and we can continue the project. _________________
|
All times are GMT |Page 1 of 1
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum
HQ Network: 8,771 | 
Guests: 2108 | 
Members: 0 
Forums 
