berniethumb Xbox-HQ User Xbox Version: Xbox V1.0 Modded: SID v4.5
Joined: Feb 21, 2007 Posts: 11
Posted: Thu Dec 11, 2008 5:32 am Post subject: swapping softmodded HD's from one xbox to another
Thanks for all of your help 2 years ago. I recently removed my 120gig Seagate HD from my old xbox v1.0. I no longer have access to that xbox v1.0 but I do have the floppy disk with the unlock tools and the cd-rw with the xboxhdm iso that I used to create the hard drive.
I have in possession an xbox v4.0, it's 120gig hd just recently crashed. I do have the cd-rw iso used to create that v4.0 harddrive (both softmodded hd's from v1.0 and v4.0 are identical 120 gig seagates) from xboxhdm (but I lost the unlocking floppy- I hope this doesn't matter since the hd is trashed)
I was just trying to figure out the best way to put my old xbox's v1.0 120gig HD into my Xbox v4.0? I put that working 120 gig hd (from v1.0) into my pc with the v1.0 iso for the hdm and I put in the floppy with unlocking tools, but could not figure out how to unlock it and exit out of that program...
dartht33bagger Moderator
Joined: Apr 17, 2007 Posts: 5408 Location: Oregon, USA
Posted: Thu Dec 11, 2008 5:42 am Post subject:
Does your 1.4 xbox have a chip in it? If it does you can just unlock the V1.0 HDD and put it into the new xbox. _________________
berniethumb Xbox-HQ User Xbox Version: Xbox V1.0 Modded: SID v4.5
Joined: Feb 21, 2007 Posts: 11
Posted: Thu Dec 11, 2008 2:53 pm Post subject:
No, both xbox were softmodded and I no longer have the v1.0 xbox. I only have its 120 gig HD.
crackface47 Xbox-HQ Elite Member
Joined: Jan 30, 2007 Posts: 344 Location: GA, United States
Posted: Thu Dec 11, 2008 4:54 pm Post subject:
unless u can obtain the eeprom used to lock it, then it screwed, i have a 40 gig locked, and i tried everything to remove the password on it, even writing zeros to the hdd doesn't work.
berniethumb Xbox-HQ User Xbox Version: Xbox V1.0 Modded: SID v4.5
Joined: Feb 21, 2007 Posts: 11
Posted: Thu Dec 11, 2008 7:12 pm Post subject:
I have the floppy with the unlock code for the 120gig drive that was in my xbox v1.0 (I also have the code written down on paper). I even have the cd-rw that I used to create that 120gig drive from the orginal xbox HD v1.0 using Xboxhdm. On that cd-rw is the eeprom. I just cannot unlock that 120gig HD with xboxhdm and keep it unlocked to use my newer xbox's v4.0 cd-rw (remember that v4.0's 120 gig hd just crashed) to format that 120gig drive that I had in my old xbox v1.0 for the new xbox v4.0.
dartht33bagger Moderator
Joined: Apr 17, 2007 Posts: 5408 Location: Oregon, USA
Posted: Fri Dec 12, 2008 6:21 am Post subject:
Well you have 2 options. You can either get the eeprom off the floppy disk and make a new boot disk since it sounds like the floppy isn't working. Or you could use HDD unlock to unlock it:http://www.hddunlock.com/ The only downside to HDD unlock is that it erases all data on the drive. _________________
|
All times are GMT |Page 1 of 1
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum
HQ Network: 11,159 | 
Guests: 1752 | 
Members: 3 
Forums 
