Posted: Mon Oct 13, 2008 5:26 pm Post subject: FTP to my Xbox with XECUTER2.. I cannot connect..
I am trying to connect to my Xbox with Xecuter2 chip, but I get this error from my FTP (after I've configured everything like it should be configured):
[R] Connecting to 192.168.1.203 -> IP=192.168.1.203 PORT=21
[R] Connected to 192.168.1.203
[R] Connection failed (Connection lost)
[R] Delaying for 40 seconds before reconnect attempt #1
I am behind a router, so perhaps I should allow the connection..? Not sure how I do this since Xbox is not an application itself.. Hmm... So, how do I do this? I've got a Linksys WRT54GL router..
I managed to find out that the login + pass for FTP with Xecuter2 is x3/x3 (found on this page!
I am not quite sure which Xecuter2 version I've got.. and I am not quite sure how I can figure it out..
The Xbox manages to locate IP address, DNS resolve and all that, but when I try to use FTP to connect to the Xbox, I get the above mentioned 'error'..
I just want to transfer 'Zsnesxbox' to my Xbox.. But now I am having trouble to do so..
So.. any ideas how I do this, huh?
dogfyter Xbox-HQ Enthusiast
Xbox Version: 1.4 Modded: x3
Joined: Sep 18, 2006 Posts: 25 Location: So Cal
Posted: Mon Oct 13, 2008 7:55 pm Post subject:
You need to find your ftp id and password in your dashboard settings. Typically they are both "xbox". I am assuming you know that you need to have ftp settings on your dashboard set to "DHCP" as well. If not, you may need to find a tutorial on how to set up a connection with a router.
oriug Xbox-HQ Newbie
Xbox Version: 1.4 Modded: x3
Joined: Oct 13, 2008 Posts: 7
Posted: Mon Oct 13, 2008 8:26 pm Post subject:
Yeah. I have tried both "xbox" as l/p and "x3" as l/p, but none works.. Also, there is not a setting option that lets me do what you mention on my Xbox.. Hmm..
Some person said this in another chat:
"have you installed a hacked dash? (xbmc /evo-x/ avalaunch etc) ?
if not get slayers evo-x and install one
if you got an x3 it has its own ftp server built into it so you can do it thru that."
I replied it with:
"Hmm.. How would I check if I've got x3..? It only displays 'Xecuter2'.. And no, I haven't installed anything.. at all.. I just sent in the Xbox for chip/modifying and that's all.. Haven't installed anything myself..
How would I do this then..? Got any pointers?"
So yeah... I am pretty much screwed, huh?
wes213 Administrator
Joined: Feb 04, 2007 Posts: 10520 Location: Harrisonburg V.A.
Posted: Mon Oct 13, 2008 8:31 pm Post subject:
Just pop the top off the xbox and post a pic of the chip.
dogfyter Xbox-HQ Enthusiast
Xbox Version: 1.4 Modded: x3
Joined: Sep 18, 2006 Posts: 25 Location: So Cal
Posted: Mon Oct 13, 2008 9:51 pm Post subject:
What dashboard are you using? Every dash has network settings.
oriug Xbox-HQ Newbie
Xbox Version: 1.4 Modded: x3
Joined: Oct 13, 2008 Posts: 7
Posted: Mon Oct 13, 2008 10:35 pm Post subject:
Yeah, I know that, but it looks like I don't got a fake dash installed on my Xbox since it doesn't say anything about what sort of dash I've got when I check its settings and such..
There's no other choices than Music, Settings, Xbox Live and Memory. In settings, I can only change the usual stuff like audio, clock, video etc. Nothing about dashboard settings etc.
Hmm.. perhaps I should grab slayers and install xbmc as my main dash..? It was said so in another forum.. Hmm.. But the question then would be; how do I do that? Burn the dash on CD and install the dash on my Xbox through that CD, huh?
wes213 Administrator
Joined: Feb 04, 2007 Posts: 10520 Location: Harrisonburg V.A.
Posted: Tue Oct 14, 2008 3:05 am Post subject:
Download AID 4.30 and read the guide that comes with it to install any dash you want: http://www.aidtracker.com/
You will need a bit client to download from the AID tracker.
oriug Xbox-HQ Newbie
Xbox Version: 1.4 Modded: x3
Joined: Oct 13, 2008 Posts: 7
Posted: Fri Oct 17, 2008 3:41 pm Post subject:
Ok.. I was told to install Slayers Evox.. So I did that..
Well, I did run option 5D from the Slayers Disc option. It formated & copied everything. What am I supposed to do after this then? Doesn't this install what I need, perhaps? Because I tried running the Xbox without the Slayers DVD, and it didn't bring up any dashboard.. I guess that the dash isn't installed yet.. SO.. I should now go for.. which step of the guide? ... Sorry. A bit confused here.. All I've done so far, is step 5D..
Joined: Feb 04, 2007 Posts: 10520 Location: Harrisonburg V.A.
Posted: Fri Oct 17, 2008 7:26 pm Post subject:
Im sorry bro but slayers is old and dead software, i dont intend to read and lern the guide to walk one person to use it.
Get aid and do the one click install have a drink and your done, slayers is the hard way and takes more time to figure out then it takes aid to get the job done.
dogfyter Xbox-HQ Enthusiast
Xbox Version: 1.4 Modded: x3
Joined: Sep 18, 2006 Posts: 25 Location: So Cal
Posted: Fri Oct 17, 2008 10:58 pm Post subject:
What bios are you using?
Stan1971 Xbox-HQ Enthusiast
Xbox Version: v1.1 & v1.4 Modded: Chipped & Softmod
Joined: Oct 29, 2007 Posts: 20 Location: Scotland
Posted: Fri Oct 24, 2008 7:15 pm Post subject:
Oriug, how did you get on?
Did you d/l and use the one click install option on aid?
What bios is on the chip? I've got an xecuter 2.3 and had flashbios 3.03 on it as standard and changed to x2.5035.137 ( i have a 250gb hd) on bank 1. Bank 2 still has flashbios just in case everything goes tits up!
|
All times are GMT |Page 1 of 1
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum