Joined: Feb 04, 2007 Posts: 10520 Location: Harrisonburg V.A.
Posted: Tue Aug 07, 2007 3:00 pm Post subject:
Well if your running an X-2 switch banks and flash it with a new bios error 5 is telling you its unlocked so you dont need an eeprom code 13 tells you to add a dash so like i said switch banks flsh the bios and start from scratch.
daredevil1991 Xbox-HQ User
Joined: Jul 26, 2007 Posts: 19
Posted: Wed Aug 08, 2007 1:12 am Post subject:
ok how would i go about doing that not to familiar with it ....major newbie at this...ive downloaded aid but everytime i put in the disk nothing happens ...im using dvd-r it reads them fine but cant get any of the dashes to load
daredevil1991 Xbox-HQ User
Joined: Jul 26, 2007 Posts: 19
Posted: Wed Aug 08, 2007 2:05 am Post subject:
i even went through all the connections and all is fine it not loading aid at all when i put disk in ive been getting error code 13 now and dont know how to install a new dash aid isnt loading when the box first strts like it says it should at wits end here what can i do
wes213 Administrator
Joined: Feb 04, 2007 Posts: 10520 Location: Harrisonburg V.A.
Posted: Wed Aug 08, 2007 2:27 am Post subject:
Did you burn just the Aid iso file to disc by its self?
what bank are you useing on your chip and have you flashed a bios to it?
daredevil1991 Xbox-HQ User
Joined: Jul 26, 2007 Posts: 19
Posted: Wed Aug 08, 2007 3:16 am Post subject:
yes i flashed the linux bios to it from executer everytime i load that it shows me a penguin with a beach behind it
ive also loaded evox on there and all i get after i go to that bank is the xbox logo then error 13
ive burned to aid disks 1 by itself and another with a bunch of other dashes on it but wont startup on startup on the xbox
wes213 Administrator
Joined: Feb 04, 2007 Posts: 10520 Location: Harrisonburg V.A.
Posted: Wed Aug 08, 2007 3:44 pm Post subject:
Did you format the OG MS dash and if you did did you install the ms dash from the aid disc?
daredevil1991 Xbox-HQ User
Joined: Jul 26, 2007 Posts: 19
Posted: Wed Aug 08, 2007 6:25 pm Post subject:
for some reason the aid disk doesnt start up and cant get it to open when i put it in the drive maybe some error due to burning ...any suggestions would be helpful...thanx
wes213 Administrator
Joined: Feb 04, 2007 Posts: 10520 Location: Harrisonburg V.A.
Posted: Wed Aug 08, 2007 6:34 pm Post subject:
daredevil1991 wrote:
yes i flashed the linux bios to it from executer everytime i load that it shows me a penguin with a beach behind it
ive also loaded evox on there and all i get after i go to that bank is the xbox logo then error 13
ive burned to aid disks 1 by itself and another with a bunch of other dashes on it but wont startup on startup on the xbox
How did you load evox if you can run the aid disc?
daredevil1991 Xbox-HQ User
Joined: Jul 26, 2007 Posts: 19
Posted: Wed Aug 08, 2007 7:50 pm Post subject:
downloaded the m8.bin file and made a iso with dummy file ...i even tried loading cromwell but no go either ...i also installed 3.03 installer but keeps asking for bios disk ...any help thanx
wes213 Administrator
Joined: Feb 04, 2007 Posts: 10520 Location: Harrisonburg V.A.
Posted: Wed Aug 08, 2007 10:51 pm Post subject:
The bios its asking for is 5053 bios put it on your desktop and http flash it to you xbox.
With that done you can launch aid.
daredevil1991 Xbox-HQ User
Joined: Jul 26, 2007 Posts: 19
Posted: Thu Aug 09, 2007 8:50 pm Post subject:
no that didnt work so what else can i try ???
wes213 Administrator
Joined: Feb 04, 2007 Posts: 10520 Location: Harrisonburg V.A.
Posted: Thu Aug 09, 2007 10:03 pm Post subject:
daredevil1991 wrote:
no that didnt work so what else can i try ???
What didnt take the 5053 bios or launching aid?
daredevil1991 Xbox-HQ User
Joined: Jul 26, 2007 Posts: 19
Posted: Thu Aug 09, 2007 10:27 pm Post subject:
5053 didnt work ..but was able to install the evox dash still getting error 13 in evox dash ..what else can i try
wes213 Administrator
Joined: Feb 04, 2007 Posts: 10520 Location: Harrisonburg V.A.
Posted: Fri Aug 10, 2007 2:14 am Post subject:
Im out of things to tell you if you make an iso with a dummy file of the 5053 bios renamed to just bios and flash it to the chip the aid disc will fire up thats how i do it every time.
boobs Xbox-HQ Elite Member
Xbox Version: V1.6 V1.3 Modded: X3CE
Joined: Dec 13, 2005 Posts: 303 Location: Australia N.S.W
Posted: Fri Aug 10, 2007 5:32 am Post subject:
im going to step in here did you use a cd-rw or a dvd-r when you burned it cd-r don,t work
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum