Does anyone know where to find a Xenium Gold Sp install guide for 1.6b?
Ive looked around the internet but i can only find a guide for 1.6...
impwiz V.I.P. Lifetime Xbox Version: all Modded: everything
Joined: Aug 30, 2005 Posts: 1070 Location: Detroit
Posted: Tue Jul 18, 2006 3:23 pm Post subject:
I think the 1.6 guide will work for your 1.6b. _________________
gensand Xbox-HQ Newbie Xbox Version: all Modded: everything
Joined: Jun 25, 2006 Posts: 5
Posted: Sat Jul 22, 2006 9:50 am Post subject:
I've been looking for the same thing. I received my Xenium Gold today
and the install guide shows the adaptor with 12 pins to put the mod
chip on. My adaptor has 16 pins.The gold chip has 12. Which way should I shift it, or center it leaving two on each side I have
looked all over and haven't found any install guide that even mentions the Gold SP Ice.
My XBox is a 1.6b too. Also they sent a USB adaptor. I'm
looking for some information on that too.
enigma516 V.I.P. Lifetime
Joined: Feb 07, 2005 Posts: 2743 Location: Florida
Posted: Sat Jul 22, 2006 2:27 pm Post subject:
There is no Install guide for the Xenium Gold. Just use the Iceguide installation. It covers pretty much al xeniums. It will show you how to install your chipUse the 1.6 part and you'll be fine.
shaymus Xbox-HQ Member Xbox Version: 1.6 Modded: Xenium S.P.ICE
Joined: Oct 06, 2005 Posts: 65 Location: Boone NC
Posted: Sat Jul 22, 2006 4:11 pm Post subject:
gensand wrote:
I've been looking for the same thing. I received my Xenium Gold today
and the install guide shows the adaptor with 12 pins to put the mod
chip on. My adaptor has 16 pins.The gold chip has 12. Which way should I shift it, or center it leaving two on each side I have
looked all over and haven't found any install guide that even mentions the Gold SP Ice.
My XBox is a 1.6b too. Also they sent a USB adaptor. I'm
looking for some information on that too.
The USB adapter fits in the controller port. It's for a mouse or keyboard. _________________ Life is like a jalepeno. What you do today, may burn your ass tomorrow!
gensand Xbox-HQ Newbie Xbox Version: 1.6 Modded: Xenium S.P.ICE
Joined: Jun 25, 2006 Posts: 5
Posted: Sat Jul 22, 2006 8:13 pm Post subject:
All I need to know is which pins to use with the Gold modchip. My adaptor has 16 male pins.(two rows of 8 and the Gold chip has 12 female on its conector block.(two rows of 6) I haven't found any install guides that shows these. All the adaptors show 12 pins. Like I said I just got the kit yesterday. Maybe something changed? I don't want to test it on different pin locations and take a chance on wiping out the OS.
JBriZzeL V.I.P. Lifetime
Joined: Mar 26, 2006 Posts: 1386 Location: Gearsville,USA
Posted: Sat Jul 22, 2006 10:08 pm Post subject:
i got my xecuter and it came with 12 little pins and and i didn't ven need to install them. i used a pin header install but i don't know if xenium uses pin headers.
hoyas111 Xbox-HQ Elite Member Xbox Version: 1.6 Modded: Xenium S.P.ICE
Joined: Jun 17, 2006 Posts: 357
Posted: Tue Jul 25, 2006 1:42 pm Post subject:
gensand, i was told you - "Put the chip on the pins farthest away from the screw and long end facing to the left (looking from the front).
But, i have done that and when i power my xbox, 5 lights should go on, but dont. I have checked all the wires especially the d0, what am i doing wrong?
gensand Xbox-HQ Newbie Xbox Version: 1.6 Modded: Xenium S.P.ICE
Joined: Jun 25, 2006 Posts: 5
Posted: Wed Jul 26, 2006 12:11 am Post subject:
hoyas111, I read that same insruction and stuck it on that way and
every thing works perfect, modchip bios comes up and all the menus
are just fine including the MS$ bios. However, I'm about to go out of my mind trying to get Evolution or some dashboard installed. I keep getting
"ERROR: FILE DOESN'T FIT" I have read and followed every manual on the internet. I even used the USB adaptor with a memory stick. I dont have any trouble getting it to be recognized. I'm sure there is some simple stupid reason. Any one with some thoughts on this, please help.
Thanks
hoyas111 Xbox-HQ Elite Member Xbox Version: 1.6 Modded: Xenium S.P.ICE
Joined: Jun 17, 2006 Posts: 357
Posted: Wed Jul 26, 2006 2:11 pm Post subject:
did you make your dashboard files into an iso?
enigma516 V.I.P. Lifetime
Joined: Feb 07, 2005 Posts: 2743 Location: Florida
Posted: Wed Jul 26, 2006 5:50 pm Post subject:
Ok listen up. You need to flash your chip with a bios before you can install ANYTHING. Trying to install an app or dash without flashing 1st is a waste of your time.
Get a bios either Xecuter or Evox and then get a hold of AID 3 with the updates and finally burn the iso and install whatever apps abd dash you want. _________________
gensand Xbox-HQ Newbie Xbox Version: 1.6 Modded: Xenium S.P.ICE
Joined: Jun 25, 2006 Posts: 5
Posted: Thu Jul 27, 2006 5:10 am Post subject:
When I read your post, enigma516, I thought my troubles were over. I went to the download section and tried several of the biosof 256k or less
including Xecutor and Evox. I have ftpd the bios to the Xbox E dr. which shows up fine but when I select it I still get the same Error msg. Doesnt fit. I get the same error when I try it with the USB.
I get the Xenium Gold 24K (2.3.1 OS) at start up. Launch Menu, Add A New Item, Where would like to launch from? , ( FLASH), then the list of locations shows up, then I select the bios, and the error msg pops up.
Thanks for any advice. I thought this mod install was going too much good up to this point.
enigma516 V.I.P. Lifetime
Joined: Feb 07, 2005 Posts: 2743 Location: Florida
Posted: Thu Jul 27, 2006 3:36 pm Post subject:
OK, have you EVER been able to flash your chip at all? Try the Xecuter 4983.06 bios. I have flashed the Xenium golds with that one or the 5032 Bios. _________________
pezzar V.I.P. Lifetime Xbox Version: V1.6 Modded: Xenium Gold OS v2.3.1
Joined: May 12, 2005 Posts: 976 Location: Seaside, England
Posted: Thu Jul 27, 2006 9:20 pm Post subject:
hoyas111 wrote:
when i power my xbox, 5 lights should go on,
with the chip fitted only 4 leds should be lit
you dont flash dash files to the chip you flash bios files. Remember to extract the files before flashing. If you try to flash bios.zip you will get an error. Extract the archive and flash the .BIN file
to burn a bios/recovery DVD for Xenium check my tut at this link
hoyas111 Xbox-HQ Elite Member Xbox Version: V1.6 Modded: Xenium Gold OS v2.3.1
Joined: Jun 17, 2006 Posts: 357
Posted: Thu Jul 27, 2006 11:25 pm Post subject:
im not there yet.......pezzar.. My modchip doesnt light up at all, and it does nothing. right now its as good as having no chip in my xbox. Yes I HAVE checked the d0
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum
HQ Network: 11,112 | 
Guests: 2606 | 
Members: 0 
Forums 
