|
|
Make your xbox power LED half green half red (v0.1) |
|
Make your xbox power LED half green half red (v0.1)Published by anonymous on 2003-11-11 Category: Hardware Mods/Addons | Page Views: 5,871
Tutorial written by : Mario Tedesco Jr.
Last edited: August 18, 2003
STEP 1:
Open your Xbox and remove the hard drive. (You can remove the dvd-rom if you like, but it is not needed. It just makes things a little more easier to move.)
STEP 2:
Locate the group of yellow wires next to the group of large multi-colored wires (the power connector for the mainboard). This is near the front of the Xbox and slightly off center to the right.
STEP 3:
Unplug the yellow wires from the mainboard.
STEP 4:
There are 9 yellow wires. You need to locate 7 and 8 and swap them. The easiest way to do this is to either use a flashlight and/or magnifying glass (the #'s are small). Find wire 1, which will have a little arrow just below it. Then count in the same row by 2, till u get wire 7 (ie: 1 to 3 to 5 to 7, the 7th wire will be the third wire from the #1 wire on the same row.). Wire #8 will be direction across from the #7 u just located. Simply use a pin (other tools can be used such a a staple/toothpick, but pin is the best) to pry back the little WHITE tab that holds back the wire. Then slip the wires out and swap them.
STEP 5:
Simply plug the wires back into the same spot you pulled them out of and VWALLA! As you turn on your xbox, the left half of the LED power button should be green, while the right half should be red. ENJOY!
Tutorial written by: Mario Tedesco Jr.
|
|
|
Browse Tutorials |
|
| |
| Latest News | | | Popular Xbox Games | |
Tony Hawk's Pro Skater 4 Page Views: 324,499 The world's best skateboarding game reinvents itself to give users the real life experience of a hardened amateur skater. A completely new career mode and Go Pro theme compliments the same elements th.. | | More Xbox Games |
| |