Posted: Wed Sep 16, 2009 1:16 pm Post subject: 2.6CE Worked For Years - Now Fragging
Xbox v1.6B modded years ago
Xecuter 2.6ce socket install with LPC rebuild kit
Started with occassional boot failures (fragging or freeze up after flubber)
Now consistantly frags when chip is enabled.
I don't see any obvious solder joints broken. Is this common? Should I maybe reheat each solder joint and add solder? Can I remove and reuse/reinstall LPC rebuild board? My green wire looks pinched... that would't cause this would it?
user1 V.I.P. Member
Xbox Version: 1.0 - 1.6 Modded: TSOP - Xecuter2.6
Joined: May 18, 2007 Posts: 609 Location: UK
Posted: Wed Sep 16, 2009 3:07 pm Post subject:
I would check the green wire, replace it if necessary, that sounds like a good starting point.
If you are careful with the LPC rebuild board you should be able to use it again. _________________
stormhatred Xbox-HQ Newbie
Xbox Version: 1.0 - 1.6 Modded: TSOP - Xecuter2.6
Joined: Sep 15, 2009 Posts: 6
Posted: Wed Sep 16, 2009 11:25 pm Post subject:
Green wire replaced to no prevail. Any chance I could make it useable by softmodding the hdd on my pc? I don't know anything about softmodding yet.
My hdd is unlocked at the moment.
user1 V.I.P. Member
Xbox Version: 1.0 - 1.6 Modded: TSOP - Xecuter2.6
Joined: May 18, 2007 Posts: 609 Location: UK
Posted: Thu Sep 17, 2009 8:30 am Post subject:
Whats on the other bank of your chip, could you not re-flash ? _________________
stormhatred Xbox-HQ Newbie
Xbox Version: 1.0 - 1.6 Modded: TSOP - Xecuter2.6
Joined: Sep 15, 2009 Posts: 6
Posted: Thu Sep 17, 2009 12:33 pm Post subject:
Flashed with X2 programmer... banks 1&2-cromwell, banks 3&4 M8 1.6 Yorishimo from xbins.
user1 V.I.P. Member
Xbox Version: 1.0 - 1.6 Modded: TSOP - Xecuter2.6
Joined: May 18, 2007 Posts: 609 Location: UK
Posted: Thu Sep 17, 2009 2:43 pm Post subject:
Does it still FRAG if you try to boot Cromwell ?
You could load the Eurasia pro generic flash disc and flash the banks with the M8 bios on with a different bios. _________________
stormhatred Xbox-HQ Newbie
Xbox Version: 1.0 - 1.6 Modded: TSOP - Xecuter2.6
Joined: Sep 15, 2009 Posts: 6
Posted: Thu Sep 17, 2009 5:04 pm Post subject:
Yeah it fraggs with either bank enabled. I guess I'll try totally removing and reinstalling pcb board. I don't know.. I'm just trying to get it started without buying new stuff.
forahobby Administrator
Joined: May 22, 2003 Posts: 15702 Location: NSW, Australia
Posted: Sat Sep 19, 2009 6:05 am Post subject:
Dam man, not good.. I always thought the x2 were very reliable.. Never heard of any dramas with them..
Sounds like its time to replace your modchip or maybe look into softmodding or flashing the onboard bios. _________________
Posted: Thu Jan 21, 2010 3:19 am Post subject: fragging
I have the same problem, with my xcuter2.6 work for 2 years then you start it on off on off then red and gree lights and blank screen the three wires soldered to the board are good I replaced the chip same problem any suggestions
|
All times are GMT |Page 1 of 1
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You can attach files in this forum You can download files in this forum
Forums 
Guests: 728 | 
Members: 6
