Posted: Sat Sep 25, 2004 4:45 pm Post subject: WHAT DO I DO?
I had x-ecuter 2.3b lite installed with slayers auto and worked fine for months. Then the connection from the motherboard to the chip must have stopped touching. It started getting stuck after you started the game on the evox load game screen. I opened up my box and fixed the connection and made the chip glow with 2 blue LEDS. Now its in place and the chips appears to be fine but the microsoft dash only loads up and its right back to where i started with the chip in. I cant get the flash bios screen on the xbox back. I dont know how to reflash the chip to make it work once again. Please help me. Jaw
If the chip needs to be flashed again and you can't get the cromwell flashbios screen to appear then you'll prolly need an external programmer to re flash your chip.
Have a look on the Team Xecuter webby you'll find all the info you need.
forahobby Administrator
Joined: May 22, 2003 Posts: 23944 Location: NSW, Australia
Posted: Sun Sep 26, 2004 7:05 am Post subject:
you can get xecuter programmers from sites all over the internet..
They are only cheap too..
sorry i could reply earlier mate but have been flatout..
Posted: Sun Sep 26, 2004 7:44 pm Post subject: I ordered the programmer
I did some research and bought the lite programmer. I also bought a 9v battery and a parallel cable. I also got the x2cable exe and x2bm progs. So when i reflash the x-ecuter 2.3 lite I should be all good too go. Does anyone know if the programmer can flash the 2.6 Lite x-ecuter? Jaw
Yes it will....but you have to have the switch bank plugged in on the X 2.6 for the blue led's to light up.
I've just successfully re flashed my X 2.6 with the same programmer without any probs.
forahobby Administrator
Joined: May 22, 2003 Posts: 23944 Location: NSW, Australia
Posted: Mon Sep 27, 2004 4:15 am Post subject:
hey rogue and jawboogie,
Would you both mind updating your profiles for us..
Just do this:
1. Copy my signature from this post..
2. Click on the Profile link below:
http://xbox-hq.com/html/forums-profile-editprofile.html
3. Paste my Signature into your profile where it says 'signature' and then edit to reflect your xbox settings.
4. Make sure 'always display signature' is ON.
thats it..
Good to see VIP members helping each other too.
enjoy the site boys its only going to get larger and larger.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum