Xbox Version: v1.0 Modded: X3 white board with lcd
Joined: Aug 02, 2004 Posts: 2
Posted: Wed Aug 18, 2004 5:47 am Post subject: executer 2.3b pro * etremely need help*
hi there , just put in a 2.3b pro wires install .. everything booted up fine ,(with the cromwell flashing screen) then the dumb ass i am i think i put in the wrong bios on all the banks .now when i turn it on with mod activated it frgas green/red i tried to reflash (lpt port)it but it detects my mod then doesn't .. on on off repeatedly almost with the same timing as the fragging ,it wont stay detected.. i dont know what to do or if there is anything i can do or is it scrap now?? i read all the forums couldn't find any similiar problems.. any help would be greatly appreciated..
also if i changed the grey wired solder area to the one on the bottom of the board do i have to use the grey and black wires with the small plug
or can i just run the grey wire down and around from the regular wires install??
and which would be the best bios to put in there? maybe only using one or two of the banks in order to keep the original crowell bios in tact ..
thanx again
forahobby Administrator
Joined: May 22, 2003 Posts: 23944 Location: NSW, Australia
Posted: Wed Aug 18, 2004 11:45 pm Post subject:
hey nottyscotty,
Ill send our xecutor expert a pm and get him to reply to your problems.. Im sure he will have the answers you need.. Connor2k has done heaps of x2.x installs and loves them
Ill contact him now so expect a reply as soon as he has time mate.
Sorry i couldnt help ya personally but im not a xecutor expert..
talk soon and dont worry we will get it sorted mate,
Joined: Oct 01, 2003 Posts: 489 Location: Kansas City KS
Posted: Fri Aug 20, 2004 9:34 am Post subject:
Sounds to me like one of two problems. 1.) You need to resolder the d0 point or 2.)Reflash the BIOS
You say you have reflashed the BIOS already but it still wouldn't boot?
So what xbox version do you have and what bios did you flash it with? _________________ "Modding the world, one xbox at a time"
XBOX v1.0:
Xecuter 3
200GB Maxtor HDD
Evox Dash
nottyscotty Xbox-HQ Newbie
Xbox Version: v1.0 Modded: X3 white board with lcd
Joined: Aug 02, 2004 Posts: 2
Posted: Fri Aug 20, 2004 8:20 pm Post subject:
well i figured it out .. it was my LPT cable i guess it didn't like it...
i hooked up directly with LPT port from the modchip (had to take ground cover off) to my laptop and then reflashed again and the modchip stayed connected with the X2 bios manager.. evox is loaded and all is well ..
thanx to those who replyed.. it was greatly appreciated ..
scott
forahobby Administrator
Joined: May 22, 2003 Posts: 23944 Location: NSW, Australia
Posted: Sat Aug 21, 2004 6:27 am Post subject:
good stuff nottyscotty,
Hopefully you can hang around and pass on your experience to other newbies.. Thats what makes websites so good..
Anyway, just glad you got it sorted mate.. Its always something so small..
l8r all and thanks again connor2k for stepping in with his expert advice..
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum