Posted: Sat Mar 11, 2006 6:56 am Post subject: 1.4 installed slayer evox auto 2.6 now a scrolling screen
i installed x3_3294 bios and then slayer evox 2.6 now i have a scrolling screen. don't know what to do next! please help a newbie. tyhanx need more beer!
Greven Xbox-Hq Genius Xbox Version: Xbox V1.6 Modded: Xecuter 3 CE
Joined: Jan 19, 2006 Posts: 2755 Location: Calgary, Alberta, Canada
Posted: Sat Mar 11, 2006 6:59 am Post subject:
Check to make sure that you are using the right video for your TV(PAL vs NTSC). The other thing to check is if your using the HD video pack, make sure that you have it connected to a tv that will allow you to display 480p, 720p, or 1080i. If not, connect your composite cables, disable those options, and then replace the HD pack. I shouldn't have to say it, but make sure you turn it off before removing cables. _________________
Try updating your M$ Retail Dashboard using the Auto Installer Deluxe v3.0 _________________
jjbanes V.I.P. Lifetime
Xbox Version: Xbox V1.6 Modded: Xecuter 3 CE
Joined: Mar 08, 2006 Posts: 11
Posted: Sun Mar 12, 2006 6:05 pm Post subject:
i have aid in the drive. i can see a screen come up but it's scrolling too fast to read. the only thing i can figure is that evox partially loaded and messed up during. is there any way to go back to original and delete all the bios' that i tried. i put 3.0.3 back in and it still boots up to x3 3294. i tried the white red and yellow cable and also the coax cable. still scrolls with both. thanks for any help.
Greven Xbox-Hq Genius Xbox Version: Xbox V1.6 Modded: Xecuter 3 CE
Joined: Jan 19, 2006 Posts: 2755 Location: Calgary, Alberta, Canada
Posted: Sun Mar 12, 2006 7:43 pm Post subject:
Are you using an HD pack?
Are you on an NTSC or a PAL tv? _________________
Sounds to me like you need to switch the video mode. _________________
jjbanes V.I.P. Lifetime
Xbox Version: Xbox V1.6 Modded: Xecuter 3 CE
Joined: Mar 08, 2006 Posts: 11
Posted: Mon Mar 13, 2006 12:13 am Post subject:
i don't think i am using an hd pak. i can take the cord out of it and put it in my other xbox wich has evox2.5 and an xbit chip. the x3 chip was working fine until i loaded evox2.6 on it. now it powers up but scrolls. i can't even get the 3.0.1 bios to stop scrolling.
hellblazer55 V.I.P. Lifetime
Joined: Oct 03, 2005 Posts: 6381 Location: Canada
Posted: Mon Mar 13, 2006 12:19 am Post subject:
What tv are you using? HighDef or standard? _________________
jjbanes V.I.P. Lifetime
Xbox Version: Xbox V1.6 Modded: Xecuter 3 CE
Joined: Mar 08, 2006 Posts: 11
Posted: Mon Mar 13, 2006 12:43 am Post subject:
standard tube type.
hellblazer55 V.I.P. Lifetime
Joined: Oct 03, 2005 Posts: 6381 Location: Canada
Posted: Mon Mar 13, 2006 12:44 am Post subject:
Well by the sounds you xbox is trying to goto a higher resoultion than what the tv can handle _________________
jjbanes V.I.P. Lifetime
Xbox Version: Xbox V1.6 Modded: Xecuter 3 CE
Joined: Mar 08, 2006 Posts: 11
Posted: Mon Mar 13, 2006 12:49 am Post subject:
is there any way to erase the bios that i put on there and start over? i unplugged the hard drive and still does the same thing. it must be stored in the x3 chip. need to figure out a way to go back to stock.
hellblazer55 V.I.P. Lifetime
Joined: Oct 03, 2005 Posts: 6381 Location: Canada
Posted: Mon Mar 13, 2006 12:53 am Post subject:
i belive you can ftp to it, you have to find a manual or tutorial on how to flash a X3 mod chip _________________
kaovue Xbox-HQ Member
Xbox Version: Xbox V1.0 Modded: Softmodded
Joined: Jan 29, 2006 Posts: 68
Posted: Wed Mar 15, 2006 7:17 am Post subject:
i've had that problem before...i think you may have somehow switched your video mode from NTSC to PAL....u'll need a Enigma Video Switch disc to change it back...do a search you should be able to find it...its also on your AID disc.....most regular TV's in the states use NTSC over seas they use PAL
|
All times are GMT |Page 1 of 1
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum