Joined: Jul 27, 2005 Posts: 118 Location: Australia
Posted: Wed Sep 07, 2005 11:30 am Post subject: V 1.5 and 1.4 instalation manuals
where can i get v.1.4 and 1.5 install manuals for xenium s.p ice _________________
yoshie1 V.I.P. Lifetime Xbox Version: Xbox V1.6 Modded: Xenium ICE White
Joined: Dec 26, 2004 Posts: 958 Location: Akron, Ohio
Posted: Wed Sep 07, 2005 3:05 pm Post subject:
I thought the spice was completely solderless but you can go to the teamxodus.com website and get the iceguide from there which has all versions in it and is a very good manual in general. If there would be a manual on the spice I would believe it to be there in their manual section. _________________ Xbox V1.6
Xenium ICE White
EvoX M8+ 16 137+
EvoX 3935
Maxtor 300GB
dangermouse Moderator
Joined: Jun 24, 2005 Posts: 972 Location: Tucson
Posted: Wed Sep 07, 2005 9:09 pm Post subject:
The Sp.Ice addaptor is for V1.6 boards the 1.4 and 1.5 only needs the USA. The 1.5, if there is such a thing, is a one wire solder along with a USA. _________________ Xenium Ice 2.3.1 OS
200gb Seagate HDD
|HOTSWAP|Upgrade HDD|
crazyshorty89 Xbox-HQ Experienced Xbox Version: v1.1 Modded: Xenium Ice OS v2.3.1
Joined: Jul 27, 2005 Posts: 118 Location: Australia
Posted: Mon Sep 12, 2005 9:49 am Post subject: manuals
wait wait wait so your trying to tell me that you need to solder if you have a 1.5 or 1.4 so that meens i bought a solderless for no reason? _________________
Joined: Mar 12, 2005 Posts: 1887 Location: Orlando/West Palm Beach, FL USA
Posted: Mon Sep 12, 2005 1:02 pm Post subject:
Well the "1.5" is missing a continuity in one of the lpc pins...do the FLASH TUTORIALS and say you have the FOCUS CHIP (1.4/1.5) and then it will ask about the continuity of the pin.
That would be a good place to start....if all else fails, you can "AttempT" (HOWEVER I DON"T RECOMMEND IT IN THE LEAST) I have seen others get away with it, either get a Conduuctivity/Trace Repair Pen and put some sort of buffer on the mobo (A piece of "tape"< don't ask what kind of tape, I don know, any buffer that doesn't transfer current should suffice) and attempt to draw a line of conductivity to the necessary circuits.
I don't recommend it at all, I prefer soldering, but..if you know you can't solder and don't want to send it out, at least you have this option, wihch once again, I will not guarentee.
EDIT: THis is of course if you are using the USA (Solderless adaptor for the 1.4-5 _________________ XBOX v1.6
X3|.3294|XBMC
yoshie1 V.I.P. Lifetime Xbox Version: Xbox V1.6 Modded: Xenium ICE White
Joined: Dec 26, 2004 Posts: 958 Location: Akron, Ohio
Posted: Mon Sep 12, 2005 7:59 pm Post subject:
I made the same mistake when I first got into modding...I bought a 1.6 and the xenium solderless kit (spice wasnt out yet) and well I definately had to do a lot of soldering with the lpc rebuild. After that I make sure to read up completely on things I am unfamiliar with and do not trust the sites that sell things....they aren't going to say you have to solder the solerless for certain versions, it would cut down on sales.....you should be fine though...just give it a shot or trade someone with an older box so you can use the solderless. _________________ Xbox V1.6
Xenium ICE White
EvoX M8+ 16 137+
EvoX 3935
Maxtor 300GB
aweirdguy Xbox-HQ Elite Member Xbox Version: Xbox V1.6 Modded: Xenium ICE White
Joined: Aug 17, 2005 Posts: 208 Location: Minnesota
Posted: Tue Sep 13, 2005 2:26 pm Post subject:
99.9% chance if you have a focus chip you have a 1.4
to install a spice on a 1.4 just dont use the white part with the spider leg wires on it and the clear template, you only need those pieces for 1.6.
oh and use the small thick washer _________________ .
|
All times are GMT |Page 1 of 1
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum
HQ Network: 8,475 | 
Guests: 2353 | 
Members: 2 
Forums 
