Xbox Version: v1.0 Modded: softmodded through mech
Joined: Feb 03, 2005 Posts: 173 Location: cary NC
Posted: Sun Jul 24, 2005 3:52 pm Post subject: need help with my xenium ice!!!!
I know i havent been on here much but i try 2 stop by when i can. Ive been real busy at work with the dead lines on these cars.
Anyways, I bought a xenium ice bout 2 weeks ago. i decided to install it this week since i had some free time. Well i cleaned the little d0 and the place where the solderless adapter fits. I then installed it, powered it on and it frags with a red led on the modchip. i again repositioned it and this time it just goes to the m$ bubble screen with the xbxo logo and just stays there. So after a few more times of messing with it. I gave up.
Can anyone help me with this.
thanks
steve
ps: i got the chip from diveno _________________ Xbox v1.0
Evo X
Softmodded
120 Gig hdd
Custom Done Case
Good Deals: Rs6 n2o, TheModGod
Bad Deals: Lycz2004
Loki77 Xbox-HQ Freak Xbox Version: v1.0 Modded: softmodded through mech
Joined: Feb 21, 2005 Posts: 614 Location: Nebraska
Posted: Sun Jul 24, 2005 6:02 pm Post subject:
alright- so then you can get into the Bios config screen right?
rs6_n2o Xbox-Hq Genius Xbox Version: XBOX V1.0 Modded: Xenium ICE
Joined: Sep 12, 2004 Posts: 1776 Location: earth
Posted: Sun Jul 24, 2005 7:00 pm Post subject:
no what it does is when he powers on the xbox, the chip goes red and doesnt go to the xenium menu but it shows the xbox splash screen and then the xbox logo doesnt go away. _________________ XBOX
Xenium ICE
120 gig hdd
clear jewel with round cathode
cathode under the front of the xbox
XBOX360
Painted Black
Blue Ring of Light
Black Wireless Controller with Blue LEDs
XBOX360
stock
PS3
stock
Shark2th Moderator
Joined: Nov 17, 2004 Posts: 5222 Location: Tennessee, USA
Posted: Sun Jul 24, 2005 11:28 pm Post subject:
Are you sure you properly identified the version of your Xbox? Still sounds like either a D0 issue or something bent on the solderless connectors. They are easy to bend. _________________ http://twitter.com/HQ_Shark2th
StaticMind Xbox-HQ Experienced
Xbox Version: v1.0 Modded: softmodded through mech
Joined: Feb 03, 2005 Posts: 173 Location: cary NC
Posted: Mon Jul 25, 2005 1:12 am Post subject:
all i did is open it, and put it in. Its a 1.0/1.0. idk whats wrong. Rs6 n2o siad it might be the chip. Maybe can 1 of u guys take a look at it 2 see if it works or somtin. this is my first chip. I did everything in soft mod im great at them but im tryin 2 get my hands into modchips _________________ Xbox v1.0
Evo X
Softmodded
120 Gig hdd
Custom Done Case
Good Deals: Rs6 n2o, TheModGod
Bad Deals: Lycz2004
Shark2th Moderator
Joined: Nov 17, 2004 Posts: 5222 Location: Tennessee, USA
Posted: Mon Jul 25, 2005 1:20 pm Post subject:
At the Xenium site there is one thing you might try. They talk about "the paper trick" and it may help. What it is basically is a small piece of paper wedged in a specific spot (I can't remember where right now) that lifts the pins in a way to ensure full contact by all. _________________ http://twitter.com/HQ_Shark2th
rs6_n2o Xbox-Hq Genius Xbox Version: XBOX V1.0 Modded: Xenium ICE
Joined: Sep 12, 2004 Posts: 1776 Location: earth
Posted: Mon Jul 25, 2005 1:34 pm Post subject:
gotta show us this paper trick. _________________ XBOX
Xenium ICE
120 gig hdd
clear jewel with round cathode
cathode under the front of the xbox
XBOX360
Painted Black
Blue Ring of Light
Black Wireless Controller with Blue LEDs
XBOX360
stock
PS3
stock
Shark2th Moderator
Joined: Nov 17, 2004 Posts: 5222 Location: Tennessee, USA
Posted: Mon Jul 25, 2005 1:42 pm Post subject:
Abracadabra:
Take a small piece of paper and fold it into a small wedge. Place the wedge under the outside edge of the screw housing (the opposite end from the pins)then screw down. the wedge should force the adapter down on the pins giving more contact.
Tada.....
Thank you, thank you very much. I'll be here all week, donation jar is on the piano. Give generously. _________________ http://twitter.com/HQ_Shark2th
rs6_n2o Xbox-Hq Genius Xbox Version: XBOX V1.0 Modded: Xenium ICE
Joined: Sep 12, 2004 Posts: 1776 Location: earth
Posted: Mon Jul 25, 2005 1:55 pm Post subject:
(throws in 2 pennies in the jar)
dont spend it all in one place u heard _________________ XBOX
Xenium ICE
120 gig hdd
clear jewel with round cathode
cathode under the front of the xbox
XBOX360
Painted Black
Blue Ring of Light
Black Wireless Controller with Blue LEDs
XBOX360
stock
PS3
stock
Shark2th Moderator
Joined: Nov 17, 2004 Posts: 5222 Location: Tennessee, USA
Xbox Version: v1.0 Modded: softmodded through mech
Joined: Feb 03, 2005 Posts: 173 Location: cary NC
Posted: Mon Jul 25, 2005 11:17 pm Post subject:
lmao. man i am so frustrated. IT DIDNT WORK!! _________________ Xbox v1.0
Evo X
Softmodded
120 Gig hdd
Custom Done Case
Good Deals: Rs6 n2o, TheModGod
Bad Deals: Lycz2004
StaticMind Xbox-HQ Experienced
Xbox Version: v1.0 Modded: softmodded through mech
Joined: Feb 03, 2005 Posts: 173 Location: cary NC
Posted: Sun Jul 31, 2005 8:26 pm Post subject:
~*TTT*~ _________________ Xbox v1.0
Evo X
Softmodded
120 Gig hdd
Custom Done Case
Good Deals: Rs6 n2o, TheModGod
Bad Deals: Lycz2004
rs6_n2o Xbox-Hq Genius Xbox Version: XBOX V1.0 Modded: Xenium ICE
Joined: Sep 12, 2004 Posts: 1776 Location: earth
Posted: Sun Jul 31, 2005 11:58 pm Post subject:
so did you get it to work steve? _________________ XBOX
Xenium ICE
120 gig hdd
clear jewel with round cathode
cathode under the front of the xbox
XBOX360
Painted Black
Blue Ring of Light
Black Wireless Controller with Blue LEDs
XBOX360
stock
PS3
stock
TheModGod Xbox-Hq Legendary Xbox Version: XBOX V1.0 Modded: Xenium ICE
Joined: Apr 18, 2004 Posts: 5303 Location: Greensburg PA
Posted: Mon Aug 01, 2005 5:13 am Post subject:
If you want, you can send it to me and I'll get it running for you. If you want to try something, just to see if possibly it's the chip (if you are convinced your install is fine) you can flip the recovery switch and see if you at least get the recovery screen. Since you have a 1.0 mobo (has an extra fan on the board, right?) you will get a blue chip on the screen and it will say safe mode.
If this happens, then it just means the OS is corrupt and all you have to do is burn an OS update disk, and then install the OS on the chip.
If it still fails, then you may want to try a different chip..you may have a bum chip.
If you disco your D0 connection, does the Xbox boot up normally?
TheModGod
-----------------------
http://www.themodgod.com _________________ Good Deals: Death@Hand, funkydopenloven, StaticMind, Slamscaper, PorscheXboxter
Bad Deals: None Yet
Pending Deals: Vanguard
StaticMind Xbox-HQ Experienced
Xbox Version: v1.0 Modded: softmodded through mech
Joined: Feb 03, 2005 Posts: 173 Location: cary NC
Posted: Mon Aug 01, 2005 12:54 pm Post subject:
i tried everything, the recovery switch, and playin with the d0. i havent had any other color on the chip besides red. i would like to send it out but i have 2 get back from mustang week in myrtl beach first. _________________ Xbox v1.0
Evo X
Softmodded
120 Gig hdd
Custom Done Case
Good Deals: Rs6 n2o, TheModGod
Bad Deals: Lycz2004
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum