HQ NETWORK:   XBOX ONE |  XBOX 360 |  AIDELUXE HQ Network: 13,852 | Guests: 8152 | Members: 1 


   Current Location: Forums New google drive   |   Which modchip is this?   |   Anyone here capable or interested in restarting XBConnect?   |   Error code 05   |   original xbox with 0 memory   |   Why cell damage is low with ratings   |   New Game - Fursan al-Aqsa - Knights of al-Aqsa Mosque   |   Xbox-Hq.Com VIP Member Testimonials   |   XBHD: A Full-Featured Original Xbox Adapter from EON Gaming,   |   Best place for XBox ROMS?   |   
  Home | Active Topics | CD/DVD Media | Downloads | Forums | Feedback | Games | HardDrives | Homebrew | My Profile | ModChips | Reviews | Search | SoftMods | Tutorials

Xbox Forums

Discuss all aspects of the original Xbox Console in our Interactive Xbox Forums..

Get Xbox Game Pass Ultimate
Xbox-Hq.Com :: View topic - Surface Mount Component Came Off Motherboard Help
Xbox-Hq.Com Forum Index -> Xbox General Discussions
Post new topic Reply to topic    
 Surface Mount Component Came Off Motherboard Help View previous topic :: View next topic  
 
 
 
 
GabrielK
Xbox-HQ Member
Xbox-HQ Member



Joined: Jun 28, 2016
Posts: 54

Post Posted: Tue May 02, 2017 4:02 am   
Post subject: Surface Mount Component Came Off Motherboard Help
Reply with quote
 
I have had a small surface mount component break off the motherboard I have pictures and its right near the clock capacitor so Im hoping it has something to do with the clock capacitor charging circuit, it is a brown component with just the stripes at both ends with no other markings and the place it came from had "C7G7" on the motherboard. I still have it but I dont know if it has to be soldered on in a certain way like a diod. The clock cap had leaked a lot and I just finished its white vinegar clean when it broke off. Do I need this component or do I need to solder it back on if so can it be put on anyway or is there polarity?

http://s836.photobucket.com/user/sierragames/media/XBOX%20Original/20170502_131422_zpslafls5jq.jpg.html

http://s836.photobucket.com/user/sierragames/media/XBOX%20Original/20170502_131400_zps9olig0vh.jpg.html

http://s836.photobucket.com/user/sierragames/media/XBOX%20Original/20170502_131330_zpsxst88bzq.jpg.html

http://s836.photobucket.com/user/sierragames/media/XBOX%20Original/20170502_132002_zpsc63qdjms.jpg.html

http://s836.photobucket.com/user/sierragames/media/XBOX%20Original/20170502_131914_zps1pd9kawr.jpg.html

Sorry I dont know the version of this motherboard but I have a picture of it as above, it didnt have a fan on the GPU or CPU so I dont think its a Ver 1.0

_________________
Xbox Halo Green Limited Edition v1.4
Clock Cap Removed
Soft modded
UnleashX Dashboard


View user's profile Send private message
 
 
 
 
AdmiralShlong
V.I.P. Lifetime


Joined: Oct 01, 2014
Posts: 111
Location: USA

Post Posted: Sat May 13, 2017 6:29 pm   
Post subject: Re: Surface Mount Component Came Off Motherboard Help
Reply with quote
 
GabrielK wrote:
Do I need this component or do I need to solder it back on if so can it be put on anyway or is there polarity?

Sorry I dont know the version of this motherboard


Don't get your hopes up about a repair. You may have either triggered a FRAG code or blacked out the board in question.

What you just ripped off your board is a resistor to the best of my knowledge. I've never busted one off myself but every resistor on any Xbox board version as far as I know is a primary component. Meaning the board will refuse to boot or will boot with critical error code without it. The only way to verify this is to plug everything in and try to boot.

If it is a secondary component you will be able to boot and everything might actually run fine depending on what that resistor is attributed to.

Try booting it as is first. If it won't boot you may not have any options other than keep the board for scraps and spare parts. This is because when you physically detach components like this one without properly desoldering them you can fracture the contacts in the components themselves and the contacts on the actual board. If this happens to the board and it's a primary component, the board is irreparable and a scrap heap. If the components contact is fractured, then you just need a fresh one from another board. So you'll want to have a 70W soldering iron with a sharp tip nearby in case.

The polarity question though I am unsure. If it is a resistor like I'm assuming, then that sucks for you because they are usually polarity sensitive, but clearly these ones aren't labelled. Your best bet if you can save this mess of a situation is to desolder one from another board in the same spot and without turning or flipping or dropping it, place and solder it on to the board you want to save.

The solder pads I saw in the picture look really intact though! There is a considerable chance your board is still good and you can save this. I would try it with a freshly desoldered one like I mentioned if I were you. Not just because of polarity, but that one you took off looks damaged and not worth the effort. Good Luck!

_________________
320GB ST3320620A 7200RPM 16MB Cache
GELID GC-Extreme Thermal Compound
X-DU 512KB Chip & Toggle Switch
StarTech 80 wire UATA Cable
XBMC 3.5.3 Dashboard
Taiyo Yuden Clock Cap
80mm Noctua SSO2
128MB DDR RAM
iND-BiOS 5004
PHILIPS S6KM


View user's profile Send private message Send e-mail
 
 
 
 
GabrielK
Xbox-HQ Member
Xbox-HQ Member

Xbox Version: 1.0 & Corona V5
Modded: X-DU ModChip & TSOP

Joined: Jun 28, 2016
Posts: 54

Post Posted: Mon May 15, 2017 10:58 am   
Post subject:
Reply with quote
 
Thanks Admiral Dongus it sounds to be fubar but I will keep it so that one day I can use the memory chips to upgrade my green Halo edition to 128MB and I'll hang the motherboard on my wall to go with my other time pieces from the 80's and 90's, a quick question if you are reading this is are all the Samsung ram chips the same? I think from memory my Halo edition is a version 1.4 and the doner board is somewhere between 1.1 and 1.5 because it has a two row power plug ie not a 1.0 and the clock cap is not a gold Nichicon near the IDE bus so its not a 1.6
_________________
Xbox Halo Green Limited Edition v1.4
Clock Cap Removed
Soft modded
UnleashX Dashboard


View user's profile Send private message
 
 
 
 
AdmiralShlong
V.I.P. Lifetime


Joined: Oct 01, 2014
Posts: 111
Location: USA

Post Posted: Mon May 15, 2017 9:42 pm   
Post subject:
Reply with quote
 
That's a fine idea but I wouldn't advise it. I meant keep it for scraps like caps and resistors.

To answer your question, no not all Samsung 16MB chips are the same. The difference is just the firmware, but still, do not cross them. To ID the firmware check the last digit before the -QC50. For example, all 1.0's and 1.1's use K4D263238M-QC50 chips. Other common ones are F or L, can't remember which version boards though. The three digit number next to Samsung is just a production lot number, no importance at all.

If you want to try extracting chips from a board, I won't stop you. It's usually not worth it though. It's much harder removing chips without snapping or badly bending their leeds than it is to solder on new chips without busting a resitor off. It's also possible to pull a leed out of the chips interior without knowing, that is the worst to me. Especially when you find out after you soldered the chip on.

_________________
320GB ST3320620A 7200RPM 16MB Cache
GELID GC-Extreme Thermal Compound
X-DU 512KB Chip & Toggle Switch
StarTech 80 wire UATA Cable
XBMC 3.5.3 Dashboard
Taiyo Yuden Clock Cap
80mm Noctua SSO2
128MB DDR RAM
iND-BiOS 5004
PHILIPS S6KM


View user's profile Send private message Send e-mail
 
Display posts from previous:   
  Post new topic  
 
  Reply to topic  
|
 All times are GMT | Page 1 of 1
Jump to:  
 

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
 


Get Xbox Game Pass Ultimate