Posted: Fri May 09, 2008 3:05 am Post subject: conrtoller 1 port wont work
ok, a few weeks ago my controller 1 port would work for five minutes and then stop. i would have to unplug the controller and plug it back in and it would work for another 5 minutes. rinse and repeat.
so i got fed up and switched the 1-2 controller ports with the 3-4. and suprisingly 2-4 worked fine and now the 1st controller port wont work at all.
and the way my emulators are set up you have to be the first player to navigate through them/play them.
so i was wondering how to fix this. no wires seem loose, and ive tried pretty much everything.
(yes ive tried switching the ports back/ ports from another xbox. still only the 1st one wont work...at all)
i have evox and a mod chip (dont know wich one) and i have a switch to turn it off. the controller still wont work with it off so its not that.
wes213 Administrator
Joined: Feb 04, 2007 Posts: 10520 Location: Harrisonburg V.A.
Posted: Fri May 09, 2008 4:45 am Post subject:
Welcome to the XBOX-HQ, we hope you enjoy this and all the other HQ sites we have to offer.
You might want to go over your traces with a magnifying glass, sounds like a brake in them some ware.
SiK_WiD_iT Moderator
Joined: Jan 25, 2007 Posts: 1626 Location: Big Stone Gap, VA USA
Posted: Fri May 09, 2008 4:52 am Post subject:
have u tried using different controllers? _________________
FinalCloud Moderator
Joined: Nov 03, 2006 Posts: 2283 Location: Plymouth, UK
Posted: Fri May 09, 2008 6:10 am Post subject:
Possible m'board problem too maybe. If your ports and chip look fine then you may be looking at a loose connection further down the wire, either at the traces as wes said, or the board itself.
where exactly on the board would it be do you think, closer to the ports or closer to the chip?
wes213 Administrator
Joined: Feb 04, 2007 Posts: 10520 Location: Harrisonburg V.A.
Posted: Sat May 10, 2008 5:41 am Post subject:
Start here at the circled area and follow the traces coming out of it.
Are you sure you havent edited the XML in any way?
usb3.jpg
Description:
Filesize:
454.7 KB
Viewed:
865 Time(s)
kylephilip Xbox-HQ Newbie
Xbox Version: v1.1 Modded: Softmod & 160Gb HDD
Joined: May 08, 2008 Posts: 9
Posted: Sat May 10, 2008 6:03 pm Post subject:
i didnt, but i bought the xbox from a friend and he said the port was sketchy for a while. and it didnt completely stop working till i pulled it out so i might have loosened something. ill check it tonight and let you guys know
wes213 Administrator
Joined: Feb 04, 2007 Posts: 10520 Location: Harrisonburg V.A.
Posted: Sat May 10, 2008 6:58 pm Post subject:
I have seen a many a guys just jam in the connector and bend the pins so make sure to unhook the ports and check for that.
kylephilip Xbox-HQ Newbie
Xbox Version: v1.1 Modded: Softmod & 160Gb HDD
Joined: May 08, 2008 Posts: 9
Posted: Wed May 14, 2008 8:57 pm Post subject:
no i have not edited anything. it just stopped working when i switched ports.
and there seems to be nothing loose or anything
also my xbox does not look like the one shown, it has an upright chip connecting the 1/2 and 3/4 ports on the motherboard thing and i connect the ports the controllers connect to to the chip. so the chip acts like some sort of bridge
wes213 Administrator
Joined: Feb 04, 2007 Posts: 10520 Location: Harrisonburg V.A.
Posted: Thu May 15, 2008 3:12 am Post subject:
Yeah that would be a 1.0 or 1.1 with the daughter board for the control ports.
dartht33bagger Moderator
Joined: Apr 17, 2007 Posts: 5408 Location: Oregon, USA
Posted: Thu May 15, 2008 5:09 am Post subject:
He might also have a faulty controller port. Try switching controller port 4 with number 1 and see if that fixes the problem. Then we can go from there. _________________
wes213 Administrator
Joined: Feb 04, 2007 Posts: 10520 Location: Harrisonburg V.A.
Posted: Thu May 15, 2008 1:08 pm Post subject:
Damn Darth, did you read the first post?
kylephilip Xbox-HQ Newbie
Xbox Version: v1.1 Modded: Softmod & 160Gb HDD
Joined: May 08, 2008 Posts: 9
Posted: Tue May 20, 2008 12:36 am Post subject:
ok so i checked everything again and i still cant find anything wrong.
so i was wondering if i could write a code that says port 4 is now switched with port 1.
so
controller slot 1= 4th player
controller slot 2= 2nd player
controller slot 3= 3rd player
controller slot 4= 1st player
and this would cause the 4th player controller not to work and the 1st player one will. because i need to find a way to get the 1st one to work because thats the only one you can play the emulators with
wes213 Administrator
Joined: Feb 04, 2007 Posts: 10520 Location: Harrisonburg V.A.
Posted: Tue May 20, 2008 3:51 am Post subject:
I wold guess if it could be done it would need to be a TSOP with a bios edit, but i don't know of any guides to help you out man.
Sorry.
kylephilip Xbox-HQ Newbie
Xbox Version: v1.1 Modded: Softmod & 160Gb HDD
Joined: May 08, 2008 Posts: 9
Posted: Tue May 20, 2008 4:55 am Post subject:
yeah i dont know anything about the programing aspect of the xbox so id have to read a bunch of tutorials or something anyways but thanks
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum