Posted: Wed May 12, 2004 4:24 pm Post subject: Help with Xenium install.
I installed my xenium the quick solder way. I powered it up and it fragged 3 times then red & grn flash. I removed the chip and the problem still exists. I checked all the rails and checked for continuity and everything is fine. I reinstalled the pin hedder install after cleaning everything up and the problem still exists. Would it give this error if some how the MB was fried or the bios was corrupt?
Thanks
Mike
Sinister Xbox-HQ Newbie
Joined: May 16, 2004 Posts: 3
Posted: Mon May 17, 2004 2:35 am Post subject:
Solder splash. If you gave your board a static shock it would not do the three boots it would just be a blank screen. Check for solder splash and also make sure none of your LPC points are not lifted.
forahobby Administrator
Joined: May 22, 2003 Posts: 23944 Location: NSW, Australia
Posted: Mon May 17, 2004 4:05 am Post subject:
thanks for the help sinister.. Im getting way behind..
Im trying my best to answer every post in detail but im finding im running out of time.
I realy appreciate that 5 seconds you took to help!
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum