Posted: Wed Jan 26, 2005 5:13 am Post subject: !!Flash Not Writeable!! Help, not sure how to get around it
I am trying to softmod what appears to be a v1.3, according to xbox-scene. i have had no problem flashing any of the version 1.0 or 1.1's but this is the first one i have done above those. i get this error when loading flashing the bios:
Manufacturers ID09 Decive ID 00
!!Flash Not Writeable!!
do i need a different size bios. not sure. i am trying to use slayers auto installer but need to flash bios first and this is how i have always done it. i use mechassault hack to get in then flash, usually that is. can someone please help. thanx
bobrownik V.I.P. Lifetime Xbox Version: 1.0-1.6 Modded: xenium/aladdin/x2.3/DuoX2
Joined: Oct 21, 2004 Posts: 914 Location: PA, USA
Posted: Wed Jan 26, 2005 5:19 am Post subject: yeahhh
the solder points are not done well , thats why you get that messege _________________ Xbox v1.0/1.1/1.5/1.6a
TSOP Flash,aladdin,xenium,duox2,x2.3b
Bios Xecuter2 4983.06
HDD 80Gb-250GB
DVD Drive Samsung 616t (modded),+all stock drives
Dash UnleashX ,
ATA 133 cable
what29 Xbox-HQ Enthusiast
Xbox Version: 1.0-1.6 Modded: xenium/aladdin/x2.3/DuoX2
Joined: Jan 19, 2005 Posts: 23
Posted: Wed Jan 26, 2005 5:41 am Post subject: !!Flash Not Writeable!! Help, not sure how to get around it
i tried to connect both sets of points again with conductive ink, which i have used 5 or 6 times so far, but i still get the same error.
bobrownik V.I.P. Lifetime Xbox Version: 1.0-1.6 Modded: xenium/aladdin/x2.3/DuoX2
Joined: Oct 21, 2004 Posts: 914 Location: PA, USA
Posted: Wed Jan 26, 2005 5:53 am Post subject: yeahh
yeahh i know ,
i did it the same way for a while and came across the same problem
trust me it will work if u solder it _________________ Xbox v1.0/1.1/1.5/1.6a
TSOP Flash,aladdin,xenium,duox2,x2.3b
Bios Xecuter2 4983.06
HDD 80Gb-250GB
DVD Drive Samsung 616t (modded),+all stock drives
Dash UnleashX ,
ATA 133 cable
what29 Xbox-HQ Enthusiast
Xbox Version: 1.0-1.6 Modded: xenium/aladdin/x2.3/DuoX2
Joined: Jan 19, 2005 Posts: 23
Posted: Wed Jan 26, 2005 6:05 am Post subject: !!Flash Not Writeable!! Help, not sure how to get around it
ok, i read one tutorial that says you dont have to conect any points on the bottom of theboard, and one that says you do, i did not do that before, so i am attempting it now. i thought there were 2 sets on the top of the mobo and that is it for anything higher than a v1.1,
what29 Xbox-HQ Enthusiast
Xbox Version: 1.0-1.6 Modded: xenium/aladdin/x2.3/DuoX2
Joined: Jan 19, 2005 Posts: 23
Posted: Wed Jan 26, 2005 6:12 am Post subject: !!Flash Not Writeable!! Help, not sure how to get around it
well i tried connecting the points on the bottom as well but that did not help either. now i have 3 sets of points that are bridged. 2 on top and 1 on the bottom.
bobrownik V.I.P. Lifetime Xbox Version: 1.0-1.6 Modded: xenium/aladdin/x2.3/DuoX2
Joined: Oct 21, 2004 Posts: 914 Location: PA, USA
Posted: Wed Jan 26, 2005 6:19 am Post subject: yeahhh
v1.0- 1.1 - 1 point on top and 1 on the bottom
v1.2- 1.5 -2 points on top
extra wire needed for sharp tsop _________________ Xbox v1.0/1.1/1.5/1.6a
TSOP Flash,aladdin,xenium,duox2,x2.3b
Bios Xecuter2 4983.06
HDD 80Gb-250GB
DVD Drive Samsung 616t (modded),+all stock drives
Dash UnleashX ,
ATA 133 cable
what29 Xbox-HQ Enthusiast
Xbox Version: 1.0-1.6 Modded: xenium/aladdin/x2.3/DuoX2
Joined: Jan 19, 2005 Posts: 23
Posted: Wed Jan 26, 2005 6:48 am Post subject: !!Flash Not Writeable!! Help, not sure how to get around it
well it is not a sharp, it is hy....., tired twice more but nothing. i disconnected the points on the bottom. not sure why that tut said that but oh well. try again tomorrow, thanx
kd7hgt Xbox-HQ Newbie
Xbox Version: xbox v1.4 Modded: Xecuter 3ce
Joined: Mar 03, 2006 Posts: 3 Location: Oregon
Posted: Thu Mar 23, 2006 8:58 pm Post subject:
I also need help with a TSOP. I am working on a 1.1 I do not have the original hdd. I am using a 80 gig wd drive it works fine. This box is for my son. I have a ver 1.4 with a xecuter 3ce and a 250gig maxtor. I have the points connected on the board. The question is how do I get the x2 bios to flash on the chip. When I boot I gives me a microsoft error. code 5 or 6. I can put the 80 gig in my box and lock it and unlock it. The drive workd fine in my box. It allready has evox on the 80 gig. I have the auto installer ver 3 final. The disk works fine on my box. I have to use my samsung drive to read the disk but that is not the problem. I also have 007 auf on my memcard and I have the disk. But I can not get past the microsoft error. So again the question is how do I flash the bios after the points are done. Thakns
|
All times are GMT |Page 1 of 1
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum