Posted: Fri Feb 23, 2007 10:17 pm Post subject: X3 flashing question
ok, when flashing the X3 (cause ill have one in a week or so)
do you flash whatever bank the switch is set on at that time, or when you connect via http do you pick the bank from there?
basically, my question is when flashing the X3 chip, is the bank being flashed totally based on how you have your switches?
hope that makes sense.
stud_man50 Xbox-HQ Freak Xbox Version: 1.4 Modded: Xecuter3CE
Joined: Feb 20, 2006 Posts: 808 Location: MI, USA
Posted: Fri Feb 23, 2007 10:23 pm Post subject:
yep... also make sure you have them set to the right size... _________________ (2) XBOX v1.4:
Xecuter3CE Modchip
X3 3294 Bios
250GB Seagate HDD
XBMC Dashboard
Disclaimer: It is my intention to give the best possible advice to all forum users. However should my advice fail to be of a reasonble standard I cannot be held liable for any loss or damage caused. To act on any advice given without contemplating the consequences shows stupidity and ignorance on your behalf.
joho5 Xbox-HQ Freak
Joined: Jan 22, 2007 Posts: 699 Location: Texas
Posted: Fri Feb 23, 2007 10:44 pm Post subject:
so if you try and boot to a bios that has a blank spot, does it just go to flashbios?
also if you have a bios in a bank, but then want it erased and flashed with a new one, how would you erase the current one?
i would know how to put the new one on there, but just wondering how you clear a bank.
thanks
stud_man50 Xbox-HQ Freak Xbox Version: 1.4 Modded: Xecuter3CE
Joined: Feb 20, 2006 Posts: 808 Location: MI, USA
Posted: Sat Feb 24, 2007 2:28 am Post subject:
if you want flashbios there, you have to flash it with flashbios...but you can boot-up lets say with the back-up of the X3 which has flashbios, then CHANGE the dipswitchs to the new one you want and flash with a new bios.. to put a new bios over an old one you just have to re-flash with a new one... it just overwrites the old one... _________________ (2) XBOX v1.4:
Xecuter3CE Modchip
X3 3294 Bios
250GB Seagate HDD
XBMC Dashboard
Disclaimer: It is my intention to give the best possible advice to all forum users. However should my advice fail to be of a reasonble standard I cannot be held liable for any loss or damage caused. To act on any advice given without contemplating the consequences shows stupidity and ignorance on your behalf.
joho5 Xbox-HQ Freak
Joined: Jan 22, 2007 Posts: 699 Location: Texas
Posted: Sat Feb 24, 2007 5:47 am Post subject:
so i can boot it up to the backup (which is preflashed with flashbios), then when that boots up, i can "on the run" switch my dipswitches to the bank i want flashed, then flash it?
sorry im asking tedious questions, i just like to clear up the loose ends before i start the whole modding process.
i have an xenium right now (gold), and its very simple to install and flash, etc...but im selling that box.
thanks
stud_man50 Xbox-HQ Freak Xbox Version: 1.4 Modded: Xecuter3CE
Joined: Feb 20, 2006 Posts: 808 Location: MI, USA
Posted: Sat Feb 24, 2007 6:06 am Post subject:
ya, thats what the back-up is made for.. its not gonna crash.and yes the bios totally depends on the dip switches, so lets say you boot up on backup, then you switch them to bank one, then you flash bank one... _________________ (2) XBOX v1.4:
Xecuter3CE Modchip
X3 3294 Bios
250GB Seagate HDD
XBMC Dashboard
Disclaimer: It is my intention to give the best possible advice to all forum users. However should my advice fail to be of a reasonble standard I cannot be held liable for any loss or damage caused. To act on any advice given without contemplating the consequences shows stupidity and ignorance on your behalf.
|
All times are GMT |Page 1 of 1
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum