Posted: Thu Aug 03, 2006 12:25 am Post subject: xenium gold and a version 1.0 problem
just got a xenium gold. ! However all the pics in the manuals look nothing like mine. I've located the DO pin, but I don't know where the other 4 wires go because the template doesn't fit properly. What do i do??? My box is version 1.0
Here are pics of my board:
DSCN1053.jpg
Description:
Filesize:
114.12 KB
Viewed:
883 Time(s)
DSCN1052.jpg
Description:
Filesize:
128.48 KB
Viewed:
910 Time(s)
italian_ice Xbox-HQ Elite Member Xbox Version: 1.4 Modded: Xenium Ice
Joined: Jun 10, 2006 Posts: 341 Location: USA
Posted: Thu Aug 03, 2006 12:51 am Post subject:
Since I am pretty positive we do not have a Gold install tut on this site, I'll link to this one:
I'm unsure what four wires you are talking about since I have yet to even look at this chip yet alone install one. If the chip came with some extra wiring harness of some sort, it may just be something you dont need. I looked at this tutorial and I do not see anything with four extra wires.
Hope this helps a little. I am also wondering if you do not need to use the particular adapter that you are using as it looks like it's the adapter for the 1.6 board. _________________ Xbox 1.4
Xenium Ice
200GB HD
Refs: Pson, dbeal, impwiz
nickthefish Xbox-HQ Newbie Xbox Version: 1.4 Modded: Xenium Ice
Joined: Aug 02, 2006 Posts: 6 Location: Hollywood
Posted: Thu Aug 03, 2006 12:59 am Post subject:
Thanks but i already read that. It seems it's too new to have a manual yet. The second pic shows the 4 wires i was referring to.
italian_ice Xbox-HQ Elite Member Xbox Version: 1.4 Modded: Xenium Ice
Joined: Jun 10, 2006 Posts: 341 Location: USA
Posted: Thu Aug 03, 2006 1:17 am Post subject:
Oh, I see. The metal prongs on the adapter. I was thinking you actually had separate wires left over.
It just seems that you are using the wrong adapter for the version motherboard. In the link I provided you, the very first picture says (put back in box, adapter only for 1.6 motherboard).
Just pull that white adapter off and seat the chip ontop of the black adapter that is already installed on your board. Now, keep in mind I have not seen the Xenium Gold so am unsure how it seats to begin with. However, the Xenium Ice mod chip would just sit right onto the black adapter for versions 1.0 to 1.5 motherboards.
For version 1.6 boards you would use the white adapter. This has to be why those four prongs do not have a home _________________ Xbox 1.4
Xenium Ice
200GB HD
Refs: Pson, dbeal, impwiz
AngelosDracul V.I.P. Lifetime Xbox Version: 1.4 Modded: Xenium Ice
Joined: Mar 24, 2005 Posts: 1755
Posted: Thu Aug 03, 2006 2:41 am Post subject:
Yeah, you got the wrong adapter with your chip. It's very important to specify to the seller the version mobo you have, or else you'll end up in a situation like this. Just do as Ice says, though and you should be fine. _________________ "That which does not kill you, only makes you stronger."
XBox - 1.1, Samsung 616t DVD-ROM, 65GBWD 7200RPM Drive, Logitech Wireless
nickthefish Xbox-HQ Newbie Xbox Version: 1.4 Modded: Xenium Ice
Joined: Aug 02, 2006 Posts: 6 Location: Hollywood
Posted: Thu Aug 03, 2006 12:57 pm Post subject: ?????
! OK! I tried that but still get the power up 3 times and then flashing red/green .
I re-seated the adapter 3 times and cleaned contacts. Still no go. The red led light on the chip is on but i can't eject dvd and no audoi/video.
Do I gots me a bad chip???
P.S...
My adapter came with ALL the pins. I removed the pins as per the pictures. Should I have done this?
hoyas111 Xbox-HQ Elite Member Xbox Version: 1.4 Modded: Xenium Ice
Joined: Jun 17, 2006 Posts: 357
Posted: Thu Aug 03, 2006 2:11 pm Post subject:
Are the pins all the way into the lpc? This is what yours should look like except you have a gold.
6.jpg
Description:
Filesize:
108.17 KB
Viewed:
880 Time(s)
seesaw Xbox-HQ User Xbox Version: xbox V1.0, 1.1, Modded: Xenium Gold SP on V1.6
Joined: Nov 23, 2005 Posts: 12 Location: illinois
Posted: Thu Aug 03, 2006 2:43 pm Post subject:
If your still having problems pm me your email and I'll sent you the instructions that I have. You were using the piece needed for 1.6
Seesaw
nickthefish Xbox-HQ Newbie Xbox Version: xbox V1.0, 1.1, Modded: Xenium Gold SP on V1.6
Joined: Aug 02, 2006 Posts: 6 Location: Hollywood
Posted: Thu Aug 03, 2006 3:06 pm Post subject:
Thanx Guys! I really appreciate all the help. I just got back from radio shack with soldering pen and am going to remove solder from LPC port and am going to install rivets.
enigma516 V.I.P. Lifetime
Joined: Feb 07, 2005 Posts: 2743 Location: Florida
Posted: Thu Aug 03, 2006 4:14 pm Post subject:
This is what you need. There is no guide for the Xeniumn Gold. Use this guide and just follow the instructions for the 1.0 -1.5 versions. First thing you need to do is remove that white adapter and use the other one that came with the chip.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum
HQ Network: 8,560 | 
Guests: 2496 | 
Members: 0 
Forums 
! However all the pics in the manuals look nothing like mine. I've located the DO pin, but I don't know where the other 4 wires go because the template doesn't fit properly. What do i do??? 
My box is version 1.0
! OK! I tried that but still get the power up 3 times and then flashing red/green 
.
